Product Introduction
The complete closed unit belongs to non-standard products, with various forms of combinations. Choose the most suitable configuration according to the process requirements. A complete set of equipment generally consists of a main engine (vacuum pump), gas-liquid separator, heat exchanger, common chassis, pipelines, valves, instruments, meters, control system, etc.
Gas liquid separator: Gas liquid separation. Generally, there are air inlet, exhaust outlet, drainage outlet, water supply outlet, liquid level gauge interface, pressure gauge interface, etc.
Heat exchanger: working fluid heat exchange. Two types, plate or tube type. The cooling medium should use cooling water, and the working fluid should go through the tube side.
Piping, valves, and instruments: including gas, working fluid, mechanical seal flushing fluid, replenishment, drainage, emptying, and other piping systems.
Main Features
Complete equipment supply is more conducive to user installation and can greatly shorten the installation cycle for users. Circulating working fluid saves resources and reduces environmental pollution.
technical indicators
Extreme vacuum: 160hPa (-85kPa) or 33hPa (-98kPa)
Flow rate: 0.33-646m ³/min
Shaft power: 1.1-808kW