Coal activated carbon strength tester

NegotiableUpdate on 04/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

This coal quality activated carbon strength tester meets the requirements of GB/T12496-1999 activated carbon strength testing. According to the requirements of the national standard 7702.1~7702.14-87 "Determination Method for Strength of Coal Granular Activated Carbon", it is mainly applicable to places such as activated carbon manufacturing plants.

Product Details

The coal activated carbon strength tester meets the requirements of GB/T12496-1999 activated carbon strength determination. According to the requirements of the national standard 7702.1~7702.14-87 "Determination Method for Strength of Coal Granular Activated Carbon", it is mainly applicable to places such as activated carbon manufacturing plants.

Specification parameters of coal activated carbon strength tester:

1. Drum speed: 50 revolutions per minute (± 2 revolutions per minute)

2. Drum length: 120mm ± 1.5mm

3. Inner diameter of steel cylinder: 80mm

4. Switching time: 1-999 minutes

5. Input voltage: AC220V ± 10%

6. Measurement granularity: 1.0 level

7. Standard configuration:

(1) Quantity of steel cylinders: 2 (without reinforcement)

　　（2）Steel ball bearings: 10 pieces (14.3 ± 0.2mm)

Note: When tested in the instrument, the skeleton and surface of the sample are simultaneously damaged due to certain mechanical wear. After screening, the percentage of retained particles is calculated as the strength of the sample.

煤质活性炭测定仪