Cone bottom quartz sand pickling tank

Cone bottom quartz sand acid washing tank, ultra-high purity quartz sand water washing

Product Name:Cone bottom quartz sand pickling tankAcid leaching tank, acid storage tank, acid detergent preparation tank, acid washing wastewater treatment tank, PE storage tank

Style: Large capacity, large taper, large cone bottom DN400/DN700 flange integrated molding, large long cone, large flange for easy cutting

Feed particle size: 1-10cm quartz block/4-120 mesh quartz sand acid white and quartz acid washing purification mainly have two forms, namely acid fine sand and acid stone block. Fine sand refers to 8-120 mesh quartz sand particles, while stones refer to quartz stones larger than 1 centimeter

Application field: This product is suitable for the treatment of impurities such as yellow skin, oxide skin, and black skin on the surface of quartz blocks and quartz sand.

Materials: Quartz blocks, quartz sand, quartz powder

　30 tonsCone bottom quartz sand pickling tank定制30 ton conical bottom storage tank, conical quartz sand acid washing reaction tank

Large capacity deep cone quartz stone purification acid white reaction tank

Quartz sand or quartz stone purification acid washing reaction tank, a type of acid washing quartz sand reaction tank, solves the problems of insufficient bottom acid washing, acid discharge, slow water flow rate, and low acid washing efficiency in the existing technology. Its characteristic is that the bottom of the tank is funnel-shaped, and a drainage pipe connected to the waste liquid storage tank and a DN400/DN700 filtering sand discharge port are set below the funnel mouth. A cylindrical filter screen can be installed on the funnel part of the cone bottom of the tank body, and sand inlet and liquid inlet are set on the top of the tank body It has the advantages of reasonable structure, simple production, high production efficiency, good purification effect, and less environmental pollution, and can be widely used for acid washing and purification of quartz sand products in the later stage Acid washing, water washing, and filtration are carried out in the same tank, simplifying the operating procedures, shortening the operating cycle, and improving production efficiency; Closed operation further ensures product purity;

Cone bottom quartz sand acid washing tank, ultra-high purity quartz sand water washing

Nuoshun cone bottom storage tank, also known as cone bottom water tank, uses imported PE raw material for the barrel body, which is molded in one go through rolling molding.

Specification and dimensions of large flange for conical pointed bottom acid leaching tank

Size of 40 ton conical bottom storage tank

Model CPT-40000L barrel diameter 3050 manhole diameter 600 including cone total height 6200 cone height 1250/DN400 flange cone height 1150/DN700 flange

Size of 30 ton conical bottom storage tank

Model CPT-30000L barrel diameter 3050 manhole diameter 600 including cone total height 5200 cone height 1250/DN400 flange cone height 1150/DN700 flange

Size of 20 ton conical bottom storage tank

Model CPT-20000L barrel diameter 2750 manhole diameter 600 including cone total height 4970 cone height 950/DN400 flange

Size of 15 ton conical bottom storage tank

Model CPT-15000L barrel diameter 2750 manhole diameter 600 including cone total height 4290 cone height 950/DN400 flange

Wuhan Nuoshun cone bottom water tank inclined bottom storage tank

Product Model:CPT series conical bottom storage tank

Specification and model: 15 ton cone bottom PE tank, 20 ton cone bottom storage tank, 30 ton cone bottom storage tank, 40 ton cone bottom storage tank

Product usage: Mixing tank, ingredient tank, drip tank, dissolution tank, acid washing box, acid washing tank, filtration tank, plastic reaction kettle, high-level tank, sedimentation tank, mixing tank

PE plastic reaction kettle non-metallic iron removal acid washing reaction kettle quartz stone acid washing reaction tank

The non-metallic iron removal and acid washing reaction kettle can effectively remove non-metallic minerals such as quartz, potassium sodium feldspar, stubborn yellow skin, and rust, making your products white and flawless.

The quartz sand pickling reaction kettle is equipped with the following equipment for iron and impurity removal in quartz sand ore pickling:

One hot water boiler, one acid heating tank, four acid washing reaction tanks, two acid recovery tanks, one original acid tank, two acid pumps, and several valves and pipelines. If the production increases and the number of reaction tanks is also increased

Working Principle:

Put the processed ordinary quartz sand, wet sand, and dry sand into the reaction tank

Pump the acid solution heated to a certain temperature in the heating bucket into the reaction bucket and circulate it with sand for heating and reaction.

After reacting with sand for 12 hours, the acid solution can be deacidification, cleaned, and dehydrated.

The recovery and utilization of discharged dilute acid has no impact on the next reaction. Low acid consumption, about 5% per ton of sand, low cost, less waste acid discharged, greatly reducing the cost of wastewater neutralization

Design of Cone Bottom for Quartz Sand Pickling Tank

The tank body and flange are formed as a whole, without welds or leakage

The bottom discharge port flange supports DN700/DN400 for easy drainage and slag removal

Quartz pickling tanks all have a conical bottom for easy discharge and operation

The iron removal and acid washing reaction kettle can effectively remove non-metallic ores such as quartz, potassium sodium feldspar, stubborn yellow skin of sand, and rust

There are two main forms of quartz acid washing, namely acid fine sand and acid stone block. Fine sand refers to 8-120 mesh quartz sand particles, while stones refer to quartz stones larger than 1 centimeter