Cone shaped plastic anti-corrosion storage tank

10 tonsCone shaped plastic anti-corrosion storage tank

Wuhan Nuoshun cone bottom storage tank, also known as cone bottom water tank, uses imported PE raw material for the barrel body, which is formed by rolling molding in one go.

Design: The bottom of the bucket is a sloping cone bottom, and the carbon steel base is matched as a whole. The liquid inside the bucket can be drained in one go, with no residue and easy cleaning

Features: The product is impact resistant, leak proof, resistant to high temperatures and freezing, has a long service life, does not require maintenance, meets hygiene standards, and is reliable.

10 tonsCone shaped plastic anti-corrosion storage tank

Wuhan Nuoshun conical bottom water tank, inclined bottom storage tank, conical plastic water tank

Thickened custom pointed bottom plastic bucket can be emptied once without residue

Main material: Imported (Korean Hyundai UR644) polyethylene (PE) plastic raw material.

Product Model:CPT series conical bottom storage tank

Specifications and models: 5-ton cone bottom PE tank, 10 ton cone bottom water tower, 15 ton cone bottom water tank, 30 ton cone bottom storage tank

Product usage: Mixing tank, ingredient tank, drip tank, dissolution tank, acid washing box, acid washing tank, filtration tank, plastic reaction kettle, high-level tank, sedimentation tank, mixing tank

In practical applications, the discharge port can be left at the preset residue position slightly above, and the slag discharge port is located at the bottom of the cone, making it easy to discharge the liquid first and then the slag

Wuhan Nuoshun Conical Bottom Water Tank Conical Sharp Bottom Storage Tank Size

The 5-ton conical bottom bucket has a diameter of 1780mm, a vertical height of 2000mm, a lid diameter of 400/600mm, a total height of 2700mm, and a wall thickness of 11mm.

10 ton conical bottom bucket with a diameter of 2230mm, a vertical height of 2500mm, a lid diameter of 600mm, a total height of 3200mm, and a wall thickness of 12mm

15 ton conical bottom bucket with a diameter of 2570mm, vertical height of 2720mm, lid diameter of 600mm, total height of 3600mm, and wall thickness of 15mm

30 ton conical bottom bucket with a diameter of 3000mm, vertical height of 3450mm, lid diameter of 600mm, total height of 5200mm, and wall thickness of 28mm

40 ton conical bottom bucket with a diameter of 3000mm, vertical height of 4500mm, lid diameter of 600mm, total height of 6200mm, and wall thickness of 30mm

Design features of conical bottom storage tank:

1. Bottom of the tank: The bottom of the vertical cylindrical liquid tank is not subjected to force, and the weight of the liquid and the tank itself is directly applied to the foundation through the bottom plate. The outer surface of the bottom plate is in contact with the foundation and is prone to moisture, while the inner surface of the bottom plate often comes into contact with water and impurities deposited in the oil, making the bottom plate susceptible to corrosion; Not easy to inspect and repair

2. Tank wall: The pressure of the liquid increases with the height of the liquid surface, and the circumferential tension at the lower part of the wall plate is greater than that at the upper part. Therefore, under the principle of equal stress, the thickness of the tank wall determined by calculation is smaller at the top and larger at the bottom

3. Reinforcement: Adopting a winding reinforcement from the top to the bottom, with thickness increasing from thin to thick and density increasing from dense to sparse to form complementary reinforcement. At the same time, the overall performance of the storage tank is improved, with a longer service life and higher performance; Advantages of trapezoidal cross-section compression design: Adopting a trapezoidal compression design, the wall thickness increases in a trapezoidal manner with depth, solving the problem of increasing pressure with depth and greatly improving the compression capacity.

Wuhan Nuoshun Cone Bottom Storage Tank Cone shaped Sharp Bottom Plastic Water Tower

Cone bottom water tank is usually used in conjunction with the chassis

The chassis is usually welded with channel steel and angle steel, with a reserved space of 20-40cm at the bottom. The chassis height can also be customized according to the actual needs of the customer to ensure sufficient operating space; A fence can be added above the chassis to prevent displacement of the barrel during use;

The part in contact with the bottom of the bucket is connected by angle steel. If the liquid has a high specific gravity, it is recommended to cover the surface with iron sheets to improve safety; If it contains volatile strong acidic and alkaline liquids, it is recommended to use all stainless steel material.

Due to the increased height of the overall equipment after installing the chassis, if the tank is used indoors, special attention should be paid to the height of the factory building, and a height should be reserved for placing the tank on the chassis.

When placing the conical bottom tank, it is recommended to use a crane to lift the tank and then vertically lower it. During the lowering process, special attention should be paid to the bottom joints or flanges and other accessories to avoid compression and impact, which may cause damage to the accessories and water leakage in severe cases

The 10 ton conical bottom storage tank Wuhan Nuoshun conical bottom storage tank is commonly seen as a conical bottom flat top vertical mixing tank, which is widely used in the acid-base chemical and water treatment industries for dosing, homogenization, batching, and mixing drip tanks, reaction tanks, or mixing tanks. The large mixing type conical bottom vertical storage tank products have a flat, smooth, and sturdy inner lining surface. Compared with traditional glass lined reaction tanks of the same specification, it has better corrosion resistance, no leakage, no peeling, wear resistance, can withstand certain pressure, can withstand higher temperatures, and has a longer service life.

Integrated molding without secondary welding;

It has good sealing and no liquid leakage;

Good pressure resistance and lightweight;

Smooth inner wall, with the advantages of anti UV aging and good impact resistance;

Raw materials are corrosion-resistant, have excellent resistance to chemicals, and have a long service life