Cross rod telescopic filter

Pull rod telescopic cross filter tubeCross rod telescopic filter

Cross rod telescopic filter product introduction

Pull rod telescopic cross filter tube/Pull rod telescopic cross filter tube is an extension filter of the filter, which is also a device on the conveying medium pipeline. It is usually installed at the inlet end of the pressure reducing valve, relief valve, constant water level valve, multi spray hole valve or other equipment to eliminate impurities in the medium and protect the normal use of the valve and equipment. It has sedimentation and coarse filtration to prevent debris from blocking the valve body, protect the normal use of valves or equipment, and has functions such as rod extension and contraction. When the fluid enters the filter cartridge with a certain specification of filter screen, its impurities are blocked, and the clean filtrate is discharged from the filter outlet.

Main technical parameters of the telescopic cross filter tube with pull rod:

1. This product complies with the Q/IDIK17-2008 enterprise standard for telescopic cross filter tubes; The nominal pressure of the cross filter tube is PN10 (PN16, PN25);

3. The sealing test pressure is 1.1MPA (1.76MPA, 2.75MPA);

4. The strength test pressure is 1.5MPA (2.4MPA. 3.75MPA); 5. The pressure test shall comply with the provisions of standard JB/T9092-1999;

Picture of telescopic cross filter tube with pull rod

The following is a physical picture of the telescopic cross filter tube filter. On the left is the sewage outlet, and on top is a short pipe with telescopic function. Suitable for locations where filter devices need to be installed and installation space is limited. weThe lifting ring is conveniently installed on the side of the telescopic cross filter tube. This product is available for customization.