Cutting sewage pump

Brand: CTT Material: Cast Iron Performance: Non blocking Usage: Sewage Treatment with Impurities Drive Method: Electric Conveying Medium: Sewage, Impurities Water Pump Shaft Position: Edge Vertical Impeller Structure: Open Impeller Suction Method: Single Suction Impeller Number: 1 Product Introduction Cutting sewage pump is a water pump developed using advanced foreign technology. This series of water pumps has a tearing function, which can tear and cut long fibers, plastic bags, weeds, cloth strips and other substances in sewage, and then discharge them smoothly. Therefore, it is particularly suitable for conveying media containing hard solids, fiber materials, as well as particularly dirty, sticky, and slippery liquids

Brand: CTT	Material: Cast Iron
Performance: Non blocking	Purpose: Wastewater treatment with impurities
Drive mode: electric	Transport medium: sewage, impurity water
Pump shaft position: side vertical	Impeller structure: open type
Impeller suction method: single suction	Number of impellers: 1

Product Introduction

The cutting sewage pump is a water pump developed using advanced foreign technology. This series of water pumps has a tearing function, which can tear and cut substances such as long fibers, plastic bags, weeds, and cloth strips in sewage, and then discharge them smoothly. Therefore, it is particularly suitable for transporting media containing hard solids, fiber materials, and particularly dirty, sticky, and slippery liquids. So it is generally used to treat sewage from places such as domestic sewage and septic tanks.

The cutting sewage pump is particularly suitable for transporting liquids containing fibers, as well as particularly dirty, sticky, and slippery liquids. It is equipped with an adjusted tearing mechanism that can shred sanitary napkins, paper, hair, plastic bags, and other debris in the toilet, ensuring smooth water flow. The reamer is made of stainless steel and hard alloy, which is wear-resistant and can effectively chop up debris. The overcurrent component is designed with no blockage, which can smoothly discharge shredded debris.---

The impeller of the cutting sewage pump adoptsAThe impeller made of high-grade alloy material has5With double the cutting capacity, it can shred various types of garbage generated in farms, sewers, manure pits, and other places. So that it can be smoothly discharged through the cutting sewage pump.

Our cutting sewage pump combines a thick pump casing and stainless steel handle, which not only looks beautiful but also makes the pump more stable during operation.

Our cutting sewage pump adopts the national standardThe all copper coil motor is produced with sufficient power to ensure full power, and this motor can also be equipped with an overheat protector, which can automatically protect the safety of the water pump and extend its service life.

The cutting sewage pump also uses a hard reamer impeller, which has twice the cutting surface compared to ordinary water pumps, and the actual workload can reach up to5Twice. At the same time, our anti clogging function has been enhanced, and the quality of our cutting sewage pump is very reliable, so more people are willing to purchase our cutting sewage pump.

Characteristics of Cutting Sewage Pump

1. The cutting impeller is a cutting device assembled with stainless steel and hard alloy blades and cutterhead.

2. Adopting dual channel series mechanical seal, mechanical seal surface: alloy to silicon carbide, mechanical seal rubber component: nitrile rubber, mechanical seal spring: stainless steel; Durable and wear-resistant.

3. The motor adopts national standard copper wire motor.

4. Equipped with stainless steel screws and lifting rings.

5. Smooth and beautiful appearance!

6. Sealed and sturdy wooden crate packaging.

Note: Operating conditions for cutting sewage pumps

1The temperature of the medium shall not exceed50℃, with a density of1.0-1.3kg/m3,PHValue in6~9Within the scope.

2For pumps without internal self circulating cooling systems, the exposed liquid level of the motor part should not exceed1/2.

3In general, the pump must be used within the range of head to ensure that the motor is not overloaded. If it needs to be used within the full head range, it should be specified separately when ordering

4During operation, the motor current should not exceed the rated current of the motor to prevent it from burning out.