Cutting sewage pump

Brand: CTT Material: Cast Iron (Customizable Stainless Steel) Performance: Non blocking Pump Shaft Position: Edge Vertical Drive Method: Electric Transport Medium: Impurity Water, Sewage Usage: Domestic Sewage Transport, Impurity Water Transport Impeller Structure: Semi open Impeller Suction Method: Single suction Impeller Number: 1. Characteristics of Cutting Sewage Pump 1. The cutting part is made of alloy material with Rockwell hardness of 48HR or above, and special materials need to be customized in advance

Brand: CTT Material: Cast iron (customizable stainless steel)

Performance: Non blocking pump shaft position: Side standing

Drive mode: electric conveying medium: impurity water, sewage

Usage: Domestic sewage transportation, impurity water transportation. Impeller structure: semi open

Impeller suction method: single suction number of impellers: 1

Characteristics of Cutting Sewage Pump

1The cutting part is made of alloy material with a Rockwell hardness of 48HR or higher, and special materials need to be customized in advance.

2Full lift, low energy consumption. (Results obtained from the actual test report power curve changes)

3Convenient detachable disc design, with different forms of disc replacement according to different usage environments. (Mainly two types of knives: municipal and special types for livestock farms)

4Built in overheating protection device, default domestic high-quality bearings, imported brand bearings can be selected.

Cutting sewage pump is a special type of sewage pump, also known as cutting pump or double-edged pump. It is also one of our company's best-selling products. Our company's cutting sewage pump is mainly capable of tearing and cutting impurities such as long fibers, plastic bags, weeds, and cloth strips in the sewage pump, so that these impurities can be smoothly discharged through the pipeline. Therefore, the cutting sewage pump is particularly suitable for transporting liquids containing hard solids, fiber materials, as well as particularly dirty, sticky, and slippery liquids.

Our company produces and sells two types of cutting sewage pumps: fixed and mobile, so there will be no installation difficulties for customers. Users only need to install the elbow according to the instructions, then put on the water jacket, fix the interface between the water pump and the water hose, put the water pump into the sewage, and connect the power to start working.

In daily life, many people fix the water pump in the sewage tank, but due to the weight of the pump itself and the resistance of the sewage, it is generally difficult for one person to pull the pump up from the bottom of the sewage tank at once. So relatively speaking, maintenance is very inconvenient. However, in order to facilitate the maintenance and replacement of the cutting sewage pump on our end, an autotransformer device has been installed, making the replacement and maintenance of the cutting sewage pump relatively easier.

In order to automate the water pump, the cutting sewage pump we sell is also equipped with a control cabinet, which can be set to manual and automatic functions. If there is no one to take care of it, it can be set to automatic mode, so that people can do their own things while the pump is working. If the number of on duty personnel can be greatly reduced in wastewater treatment plants, it can save human resources.

The cutting sewage pump is one of our best-selling products. It can be customized not only for high temperature resistance, but also for stainless steel acid and alkali resistance. In order to meet customer needs, we also produce various models of water pumps, as shown in the picture, which can be sold to various parts of China. In addition, we also have many foreign customers. Due to different electricity types in different countries, we also provide special power cutting sewage pumps for foreign consumers.

The cutting part of the sewage pump produced by our company has a unique spiral structure and a sharp blade design. On the premise of ensuring efficient water conservancy performance and surpassing the same product, it also has a certain cutting ability. After customer feedback, it can ensure superior cutting performance of straw, baby diapers, cotton, cloth and other waste after shredding and discharging. It is widely used in sewage drainage stations of enterprises, factories, residential areas, and can also be used for sewage discharge from septic tanks and biogas digesters.

Note: Conditions for using the cutting sewage pump

The medium temperature shall not exceed 50 ℃, and the density shall be 1.0-1.3kg/m3.

The exposed liquid level of the motor part shall not exceed 1/2.

The pump must be used within the range of head to ensure that the motor is not overloaded.