Welcome Customer !

Membership

Help

Henan Anye Valve Co., Ltd
Custom manufacturer

Main Products:

hbzhan>Products

Henan Anye Valve Co., Ltd

  • E-mail

    hnayvalve@126.com

  • Phone

    18937139699

  • Address

    2701, 27th Floor, Yunfeng Building, Greenland Window, No. 80 Puhui Road, Zhengdong, Henan Free Trade Zone

Contact Now

D671X/D671F Pneumatic Soft Seal Butterfly Valve

NegotiableUpdate on 02/17
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin
Overview
The D671X/D671F pneumatic soft seal butterfly valve has the advantages of small size, lightweight and pleasant, reliable performance, simple matching, and large flow capacity, especially suitable for occasions where the medium is viscous, contains particles, or fibers. Pneumatic butterfly valves are widely used in industries such as food, environmental protection, light industry, petroleum, papermaking, chemical engineering, teaching and research equipment, and power
Product Details
Product Name: D671X/D671F Pneumatic Clamp Butterfly ValvePneumatic soft seal butterfly valve

Product Introduction

D671XPneumatic soft seal butterfly valveIt has the characteristics of small size, lightweight and pleasant, reliable performance, simple matching, and high flow capacity, especially suitable for occasions where the medium is viscous, contains particles, or fibers. Pneumatic butterfly valves are widely used in industrial automatic control systems in industries such as food, environmental protection, light industry, petroleum, papermaking, chemical engineering, teaching and research equipment, and power.

Product Features:

1. The pneumatic butterfly valve body only requires a small installation space, and the task principle is easy and reliable.

2. Pneumatic butterfly valves have great flow performance and minimal pressure loss through the valve.

3. Pneumatic butterfly valves have significant economic benefits, especially for larger diameter butterfly valves.

4. The valve body of the pneumatic butterfly valve is matched with the standard convex pipe flange.

5. Pneumatic butterfly valves have approximately equal percentage flow characteristics and can be used for regulating or on-off control.

6. The special seat seal of pneumatic butterfly valves is suitable for liquids and gases with relatively clean media.

Pneumatic actuator:

The pneumatic butterfly valve adopts a new GTD series or ATD series pneumatic actuator, which has double acting and single acting (spring reset), gear transmission, and is safe and reliable.

1. Gear type dual piston, with large output torque and small volume.

2. The cylinder is made of aluminum material, which is lightweight and aesthetically pleasing.

3. Manual operating mechanisms can be installed at the top and bottom.

4. The rack and pinion connection can adjust the opening angle and rated flow rate.

5. The actuator can be equipped with live signal feedback indicators and various accessories to achieve automated operation.

6. The IS05211 standard connection provides convenience for the installation and replacement of products.

7. The adjustable screws at both ends can provide a ± 4 ° adjustable range for standard products at 0 ° and 90 °, ensuring synchronization accuracy with the valve.
气动软密封蝶阀

Technical parameters and performance:

Technical parameters of GTD/ATD pneumatic actuator

D671X Pneumatic Butterfly Valve Body Parameters

Type

Double acting piston type, spring reset type

Nominal Diameter

DN40~500mm

air supply pressure

Double acting: 2-8bar/Single acting: 4-8 bar

Nominal Pressure

PN1.0、1.6MPa

output torque

Double acting: 4N · M~10560N · M

Valve shaft material

Carbon steel, 304/316/316L stainless steel

Single action: 7N · M~2668N · M

Valve body material

Ductile iron, carbon steel, stainless steel

Operating Temperature

Room temperature type: -20 ℃~80 ℃ (Ding Jing rubber O-ring)

Valve plate material

Ductile iron, 304/316/316L stainless steel, nylon

High temperature type: -20 ℃~160 ℃ (fluororubber O-ring)

valve seat seal

EPDM、NBR、 wear-resistant rubber

Action range

0~90°±5°

structural form

Medium line type, no sales type

threaded interface

GTD40-GTD83 G1/8″

temperature

EPDM≤80℃; NBR≤68℃

GTD110~GTD350/ATD50~200 G1/4″

Applicable Medium

Water, air, natural gas

Valve position signal

Positioner: 4-20mA/responder: fully open and fully closed signal

feature

Widely applicable, low overall cost, high flow rate, and low flow resistance

Overall dimensions:

Nominal diameter DN

A

B

C

D

E

Model of actuator

pressure

1.0/1.6

1.0/1.6

1.0/1.6

1.0/1.6

1.0/1.6

(For reference only)

40

140

282

63

60

32

ATD-52

50

140

286

63

60

43

ATD-52

65

140

295

70

60

46

ATD-63

80

171

300

89

63

46

ATD-75

100

186

350

106

65

52

ATD-83

125

207

392

120

65

56

ATD-92

150

254

430

132

90

56

ATD-105

200

296

443

164

103

60

ATD-125

250

296

491

200

103

68

ATD-140

300

384

565

238

118

78

ATD-160

350

501

650

280

128

78

ATD-190

400

533

703

302

135

102

ATD-210

450

589

811

335

159

114

ATD-240

500

638

895

360

196

127

ATD-270

Attachment options:

According to different controls and requirements, the following attachments can be selected:

Feedback switch: also known as limit switch, remote feedback switch signal (optional explosion-proof).

Electromagnetic valve: Double acting with two position five way valve, single acting with two position three way valve (optional explosion-proof).

Triple component: capable of stabilizing the gas source, filtering, and adding lubricating oil to the cylinder.

Handwheel mechanism: Rotate the handwheel mechanism to manually open and close the valve.

Electrical locator: Input 4-20mA signal to achieve valve adjustment function.

气动软密封蝶阀

Ordering instructions:

1. Pneumatic actuator types: double acting, single acting.

2. Type of medium, temperature, pressure.

3. Required accessories: solenoid valve, locator, signal feedback, air source processing triad, manual mechanism.

Henan Anye Valve Co., LtdWe mainly produce and sell valves. The company always adheres to the business philosophy of "technology as the guide, quality as the guarantee, integrity as the criterion, and service as the goal", upholds the principle of "adapting to and meeting the market", adheres to the belief of "integrity-based", pursues excellent quality, strives for excellence, is fast and pragmatic, and strives to provide reliable products and services for new and old customers, creating value for customers.

All text, data, and images in this article are for reference only.