DCF-L-B Right Angle Electromagnetic Pulse Valve

DCF-L-B right angle electromagnetic pulse valve, DCF right angle electromagnetic pulse valve, DCF right angle valve, DCF pulse injection valve are controlled by the pulse controller signal to open and close the valve body unloading hole, achieving injection. The pulse controller signal is timed in milliseconds, and the moment the pulse valve opens, a strong impact airflow is generated, achieving strong instantaneous injection.

The DCF-2L-B right angle electromagnetic pulse valve controls the opening and closing of the valve body unloading hole according to the signal of the pulse controller, achieving spraying. The signal of the pulse controller is timed in milliseconds, and the moment the pulse valve opens, it generates a strong impact airflow, achieving strong instantaneous spraying. The company's pulse valve products, especially the ZM series quick connect valve, have been exported to South Korea for four consecutive years. Other pulse valve products are also exported with the whole machine, and their quality has won unanimous praise from domestic and foreign customers. The pulse valve diaphragm has a service life of one million times, and the pulse valve has a service life of 3-5 years under the conditions of standardized installation, correct use, and proper maintenance. Various high-temperature pulse valves, anti-corrosion pulse valves (such as hydrochloric acid and strong alkali resistant), and various explosion-proof electromagnetic pulse valves can be made according to actual working conditions.
Working principle of DCF-L-B right angle electromagnetic pulse valve:
The diaphragm divides the DCF-2L-B right angle electromagnetic pulse valve into two chambers, front and rear. When compressed air is connected, it enters the rear chamber through the throttle hole. At this time, the pressure in the rear chamber presses the diaphragm component tightly against the output port of the valve, and the electromagnetic pulse valve is in the "closed" state. The electrical signal of the pulse jet control device causes the electromagnetic pulse valve to move backwards, the vent hole in the rear chamber of the valve opens, the rear chamber rapidly loses pressure, the diaphragm component moves backwards, compressed air is blown out through the valve output, and the electromagnetic pulse valve is in the "open" state. The electrical signal of the pulse blowing control instrument disappears, the electromagnetic pulse valve is reset, the vent hole in the rear chamber is closed, and the pressure in the rear chamber increases, causing the output port of the diaphragm component tightening valve,DCF-L-B Right Angle Electromagnetic Pulse ValveStill in a 'closed' state.