DR-803I water quality automatic sampler (remote control type

Application Overview

The sampler is independently installed at the pollution source discharge outlet (outside the monitoring station building). The environmental supervision department and the monitoring and sampling department preset the sampling time through a remote management platform or remotely control the sampling with a mobile phone, reserve sewage samples, and easily obtain the required water samples on site. This effectively solves the problems of staff repeatedly running to the site, sampling at night, and insufficient representativeness of water samples.

Features

1) Independent outdoor installation, not restricted by polluting enterprises or operators;

2) Water sample safety: fixed sampling head, fully sealed pipeline;

3) Conventional sampling: It can achieve proportional sampling such as timing and time;

4) Mobile control: remotely control instrument sampling through mobile phone;

5) Remote control (optional): It can realize remote status query, parameter setting, record uploading, remote sampling, etc;

6) One click reset: After taking the water sample, it can be restored to the initial sampling state with one click;

7) Power off protection: After power off and re powering on, the instrument can automatically restore its original operating state;

8) Records: Sampling records, power outage records;

9) Automatic emptying: After each sampling is completed, the pipeline is automatically emptied and the sampling head is blown back;

10) Automatic rinsing: Before each sampling, rinse the pipeline with the water sample to be tested to ensure the representativeness of the retained sample;

11) Small size, easy to install, and easy to maintain.

technical indicators