DUMBBELL Brittle Temperature Sample Automatic Cutting Machine

NegotiableUpdate on 02/28

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

DUMBBELL brittle temperature sample automatic cutting machine is efficient and precise: specially developed to meet the large-scale production needs of small and high-precision brittle temperature samples, * * * shortening the sample preparation time. Multifunctionality: It has the ability to produce various rectangular and square specimens, and is flexible in application. High degree of automation: equipped with automatic workpiece fixtures and a worktable driven by pulse motors. Intuitive operation: using programmable LCD terminal for operation.

Product Details

DUMBBELL Brittle Temperature Sample Automatic Cutting MachineProduct Details
SDAP-1160FAT-PT
Brittle temperature sample automatic cutting machine (applicable to the new JIS standard)

***The size of the brittle temperature specimen specified in 974 and JIS standards is extremely small, and strict allowable accuracy is defined. At the same time, there are numerous samples that need to be installed on the fixture [each test=15 samples x number of brittle failure temperature points].
Therefore, it is necessary to produce a large number of samples.
Based on this viewpoint, the max problem to be solved is to shorten the time required for sample preparation and obtain more accurate samples.
The development of this cutting machine aims to meet these requirements.
In addition, this machine combines the function of making various other samples and is a multifunctional automatic cutting machine with a wide range of applications.

sample size

Other applicable samples

Suitable for cutting materials
PP, PE and others

DUMBBELL Brittle Temperature Sample Automatic Cutting MachineMain technical parameters:

Three station design (with the middle position as the standby position)
Cutting drive components: cylinder plunger diameter of φ 160 x 75 (stroke) mm
Automatic workpiece fixture: cylinder plunger diameter φ 50 x 10 (stroke) mm
Workbench sliding drive components: pulse motor, 5-phase stepper motor
Control mechanism: Control the driver, programmable controller, programmable terminal (LCD) and combine them with other pneumatic sequence control mechanisms
External settings control panel: Programmable Terminal (LCD) 5.7 inches
Cutting room: equipped with transparent protective covers on the right, left, and rear; There is a safety gate ahead
Equipment size: Approximately 750 (width) x 500 (depth) x 1400 (height) mm
Equipment weight: approximately 250kg
Power supply: AC100V single-phase 50/60Hz***
Gas source pressure: 0.65MPa

JIS K7139 B3 type specimen: (width) 10 × (length) 80 × 4 (thickness) mm
JIS K6774, ASTM D1693 stress cracking specimens: (width) 13 × (length) 38 × 2 (thickness) mm
Various other rectangular and square specimens
***974 (2000), JIS standard (tentative): (width) 2.5 ± 0.05 × (length) 20 ± 0.25 × 2 (thickness) mm
JIS K7216 Type A (current JIS), ASTM D746: (width) 6.0 ± 0.4 × (length) 38.0 ± 2.0 × 2.0 (thickness) mm