-
E-mail
sxsepri@126.com
- Phone
-
Address
Room 10218, Building 1, No. 32 Jinye Road, High tech Zone, Xi'an City, Shaanxi Province
Product Categories
Shaanxi Saipurui Electric Co., Ltd
Dehumidification status display
NegotiableUpdate on 05/19
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Dehumidification status display
Product Details
Dehumidification status display
Scope of Application
The SPR-CZX01 dehumidification status display is designed for use with intelligent dehumidifiers in switchgear cabinets. After installing intelligent dehumidifiers in some electrical cabinets, there is no observation window to view the temperature and humidity inside the cabinets. This device can monitor the temperature and humidity inside the cabinets at any time. The SPR-CZX01 dehumidification status display is usually used in conjunction with the SPR-CN-S1 intelligent dehumidifier.
♦ Product Introduction
The SPR-CZX01 dehumidification status display adopts RS-485 connection with the dehumidification controller to read the data of the dehumidification controller and display the environmental temperature and humidity in real time. At the same time, the upper computer can be connected to the local machine through RS-485 to query the status parameters of the dehumidification controller. This device is used for data display of dehumidification controllers.
♦ Product Features
1. Advanced sensing technology
2. Strong ability to resist electromagnetic interference
3. RS485 standard interface
4. Low power consumption, energy saving, and environmental protection
♦ Product Installation
♦ Functional Description
Connect the power cord correctly, connect 2 # RS-485 to the dehumidification controller RS-485 interface, and connect 1 # RS-485 to the user data receiving RS-485 port (if no data is needed, it can be disconnected). After the device is powered on, pressSETPress the key to enter the address setting interface, confirm the address of the dehumidification controller, set the "Ad2" address information according to the address of the dehumidification controller, exit and save, and the dehumidification display will automatically display the status information of the dehumidification controller. If it is necessary to read status information through RS-485 and correctly set the "Ad1" local address, the required information can be read through the 1 # RS-485 interface.
Scope of Application
The SPR-CZX01 dehumidification status display is designed for use with intelligent dehumidifiers in switchgear cabinets. After installing intelligent dehumidifiers in some electrical cabinets, there is no observation window to view the temperature and humidity inside the cabinets. This device can monitor the temperature and humidity inside the cabinets at any time. The SPR-CZX01 dehumidification status display is usually used in conjunction with the SPR-CN-S1 intelligent dehumidifier.
♦ Product Introduction
The SPR-CZX01 dehumidification status display adopts RS-485 connection with the dehumidification controller to read the data of the dehumidification controller and display the environmental temperature and humidity in real time. At the same time, the upper computer can be connected to the local machine through RS-485 to query the status parameters of the dehumidification controller. This device is used for data display of dehumidification controllers.
Dehumidification status display
♦ Product Parameters
| Working power supply voltage | 220VAC±10% |
| rated power | 3.5W |
| display mode | seven-segment display |
| working method | auto-run |
| localhost | 001 (default, adjustable) |
| Dehumidification controller address | 005 (default, adjustable) |
| Environmental temperature range | Not lower than -10 ℃, not higher than 60 ℃ |
| ambient humidity | (10-85)% RH (no condensation) |
| Overall dimensions | 109 (length) x 48 (width) x 48 (height) mm |
| Installation method | External (screw fastened) |
| weight | About 0.2kg |
♦ Product Features
1. Advanced sensing technology
2. Strong ability to resist electromagnetic interference
3. RS485 standard interface
4. Low power consumption, energy saving, and environmental protection
♦ Product Installation
Structure diagram of dehumidification status display
Dehumidification status display
Dehumidification status display
Dehumidification status display
♦ Functional Description
Connect the power cord correctly, connect 2 # RS-485 to the dehumidification controller RS-485 interface, and connect 1 # RS-485 to the user data receiving RS-485 port (if no data is needed, it can be disconnected). After the device is powered on, pressSETPress the key to enter the address setting interface, confirm the address of the dehumidification controller, set the "Ad2" address information according to the address of the dehumidification controller, exit and save, and the dehumidification display will automatically display the status information of the dehumidification controller. If it is necessary to read status information through RS-485 and correctly set the "Ad1" local address, the required information can be read through the 1 # RS-485 interface.
Similar Product Recommend
