Deling 2.2kw vortex fan high-pressure fan

Deling 2.2kw Vortex FanFeatures:1. Due to the frictionless operation of the impeller within the body, no lubrication is required, resulting in the exhaust gas being oil-free. It is an ideal pneumatic conveying gas source for industries such as chemical and food.2. Deling 2.2kw high-pressure fan is a volumetric blower. When in use, the flow rate changes very little with changes in pressure. But the flow rate varies with the rotational speed. Therefore, the range of pressure selection is wide, and the choice of flow rate can be achieved by selecting the desired speed.3. The speed of the Deling high-pressure fan is relatively high, and the gaps between rotors and rotors, as well as between rotors and the body, are small, resulting in less leakage and higher volumetric efficiency.4. The structure of the fan determines that its mechanical friction loss is very small. Because only the bearings and gear pairs have mechanical contact in material selection, the rotor, housing, and gear ring have sufficient mechanical strength. Safe operation and long service life are major features of blower products.5. The rotor of the fan has undergone static and dynamic balance verification. The finished product runs smoothly with minimal vibration.

Deling 2.2kw Vortex FanofMaintenance and storage;1. The operating environment of the fan should be kept clean regularly, the surface of the fan should be kept clean, and there should be no debris at the inlet and outlet. Regularly remove dust and other debris from the fan and pipes.2. It can only be operated when the fan is in positive gear, and at the same time, the power supply facilities must have sufficient capacity and stable voltage. It is strictly prohibited to operate without phase. The power supply line must be a line and temporary lines should not be used for long-term power supply.During the operation of the fan, if abnormal noise is detected, the motor is severely overheating, the casing is electrified, the switch trips, and the fan cannot be started, it should be stopped immediately for inspection. For safety reasons, maintenance is not allowed during the operation of the fan. After maintenance, a trial run should be conducted for about five minutes to confirm that there are no abnormal phenomena before starting the machine.4. According to the environmental conditions of use, lubricating grease should be supplemented or replaced irregularly for the bearings (motor enclosed bearings do not need to replace lubricating grease during their service life). To ensure good lubrication of the fan during operation, the oiling frequency should not be less than 1000 hours per time. For enclosed bearings and motor bearings, ZL-3 lithium based lubricating grease should be used to fill 2/3 of the inner and outer rings of the bearings. It is strictly prohibited to operate without oil.5. The fan should be stored in a dry environment to prevent the motor from getting damp. When storing fans outdoors, rain protection measures should be taken. During storage and handling, the fan should be protected from collision to prevent damage.

configuration

1. Shell material: The blower is made of die cast aluminum, which is the same aluminum material as the Mercedes Benz wheel hub. Compared to ordinary aluminum alloys, die cast aluminum is stronger and has a lighter weight effect compared to iron shell fans.
2. Fan oil seal: The fan adopts German MERKEL oil seal, and the German MERKEL material uses fluororubber that can withstand temperatures from -25 ℃ to 300 ℃. Compared to the general oil seal, its lip temperature is 20-50 ℃ higher than the working medium temperature during operation, making it more stable in performance, maintenance free, and has a longer lifespan.3. Fan bearings: The core components of the fan are made of German SKF and Japanese NSK brand bearings, which can withstand up to 350 degrees Celsius and 4000 revolutions per minute. For domestically produced Luo axis, human centered bearings have stable performance, low noise, maintenance free, longer service life, and can ensure longer operation of the fan.