Dust collector Venturi tube

The Venturi tube produced by Chuangxin Dust Removal Equipment Company is made by one-time forming of steel plates. The principle of the Venturi effect is that when wind blows over a barrier, the air pressure near the port on the leeward side of the barrier is relatively low, resulting in adsorption and air flow.

Chuangxin Dust Removal Equipment Company uses steel plates for one-time molding productionVenturi tube Venturi tubeThe principle of the Venturi effect is that when wind blows over a barrier, the air pressure near the port on the leeward side of the barrier is relatively low, resulting in adsorption and air flow. The Venturi tube can increase the wind speed and the blowing force. The principle of the Venturi tube is simple. It changes the airflow from coarse to fine to accelerate the gas flow rate, creating a "vacuum zone" behind the Venturi tube outlet to assist in the cleaning of the bag skeleton.

Working principle of dust collector Venturi tube:

The two sides of the Venturi tube are thick and the middle is thin. The thin section has a throat, and there is a water pipe in the middle that can spray water. When the air passes through the throat, the flow rate increases, and the water pipe sprays water. The water separates into small water droplets at high speed and collides with dust in the throat, making its particles smaller and absorbed by the dust, and then separated by a cyclone separator.

Composition of dust collector Venturi tube:

It mainly consists of a Venturi tube body, a water supply device, and a gas water separator (also known as a dehydrator). The Venturi tube body includes a contraction tube, a throat tube, and a gradually expanding tube.

Advantages of dust collector Venturi tube:

Simple structure, small footprint, high dust removal efficiency, suitable for processing high-temperature or combustible dusty gases.