Dust collectors are used in cement plants, and the dust removal equipment in cement plants is designed to control the dust generated by products during the production process Dust collectors are used in cement plants. When cleaning dust in separate compartments, it is important to isolate each compartment and take turns. The pulse and cleaning cycle of each compartment need to be set in advance through the cleaning program controller before the program can automatically perform, thus achieving the desired cleaning effect of compressed air
Cement plant dust collectorDust removal equipment for cement plantsEffective in the cement industry. We know that cement plants produce a large amount of cement every day, which can have an impact on environmental pollution. In order to prevent cement powder from flying during production, Hebei Zhonghe Environmental Protection has producedDust collector for cement plant.
Cement plant dust collector
Dust removal equipment for cement plantsWorkflow
The dusty gas enters the box through the inlet of the dust collector and is filtered by the filter bag. The dust is left on the inner surface of the filter bag, and the purified gas enters the fan through the filter bag. It is sucked in by the fan and directly discharged into the room (or can be connected to the outside). As the filtration time increases, the dust adhering to the inner surface of the filter bag also increases, and the resistance of the filter bag increases, thereby affecting the dust removal effect; Using a self controlled dust cleaning mechanism for timed vibration cleaning or manually controlled dust cleaning, the mechanism automatically shakes for tens of seconds after shutdown, causing the dust adhering to the inner surface of the filter bag to shake off and fall onto the dust door, drawer, or directly onto the conveyor belt.
Dust collector for cement plantHebei Zhonghe Environmental Protection Design and Production Requirements are strict. The dust removal equipment in the cement plant has more than 10 bag chambers. It usually takes 5-30 minutes to determine the location of the broken bag from the discovery of high standard emissions. At present, the service life of dust removal filter bags is over one year, and bag breakage only occurs after one year of filter bag use. If the damaged filter bag is found in the bag chamber, simply close the bag chamber and replace it, while the other bag chambers can still operate normally. Generally, closing 20% of the bag chamber will not affect the dust removal efficiency of process equipment production and dust removal facilities.
Hebei Zhonghe Environmental Protection is committed to the technical application and scientific research and development of environmental protection industries such as flue gas purification and dust filtration, and has developed various dust removal products that are suitable for environmental development. Our market coverage is gradually expanding, and we have more customer resources.