Dust exhaust fan C4-73

NegotiableUpdate on 04/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Introduction: Features: The C4-73 centrifugal fan is mainly composed of an impeller, a casing, an air inlet, a frame transmission part, and a motor. The impeller section consists of 12 aft sloping wing shaped blades, a curved front plate, and a flat rear plate. The blades, front plate, and rear plate are all made of 16 manganese steel. The entire impeller has undergone dynamic and static balance correction, with good air performance, high efficiency, and smooth operation. The casing is made as a whole, and the installation and disassembly of the impeller are carried out on one side of the casing. The air inlet is made as a whole and installed on the side of the fan. The cross-section parallel to the shaft is curved, which allows gas to enter the impeller smoothly with minimal loss. The transmission part consists of a main shaft, a bearing box, rolling bearings, and pulleys. Usage: The C4-73 centrifugal fan is a specialized equipment for discharging gases containing dust, wood debris, fine fibers, etc. It can also be used as a general fan (such as adding a dust removal device before the fan inlet when discharging hard particles). Specification: The C4-73 centrifugal fan has three specifications: № 3.6C, 4.5C, and 5.5C.

Product Details

Product Introduction：

characteristicThe C4-73 centrifugal fan is mainly composed of an impeller, a casing, an air inlet, a frame transmission part, and a motor. The impeller section consists of 12 aft sloping wing shaped blades, a curved front plate, and a flat rear plate. The blades, front plate, and rear plate are all made of 16 manganese steel. The entire impeller has undergone dynamic and static balance correction, with good air performance, high efficiency, and smooth operation. The casing is made as a whole, and the installation and disassembly of the impeller are carried out on one side of the casing. The air inlet is made as a whole and installed on the side of the fan. The cross-section parallel to the shaft is curved, which allows gas to enter the impeller smoothly with minimal loss. The transmission part consists of a main shaft, a bearing box, rolling bearings, and pulleys.
purposeThe C4-73 centrifugal fan is a specialized equipment for discharging gases containing dust, wood debris, fine fibers, etc. It can also be used as a general fan (such as adding a dust removal device before the fan inlet when discharging hard particles).
specificationsThe C4-73 centrifugal fan has three specifications: № 3.6C, 4.5C, and 5.5C.