Dynamic Monitoring System for Geothermal Water Resources

Dynamic Monitoring System for Geothermal Water ResourcesSystem Overview

The groundwater monitoring system has developed into a fully automated wireless control network system for measurement, transmission, and storage. Generally, a water source or a watershed constitutes a monitoring network system. The monitoring system for small water sources can use wired or wireless devices to establish a transmission system that directly connects observation points with storage stations.

System functions:

1. Temperature online monitoring

2. Alarm function

3. Data storage

4. Regularly save settings

5. Printing of Historical Data Reports

6. Historical curve query and other functions.

Dynamic Monitoring System for Geothermal Water ResourcesPrecautions for use:

Waterproof temperature sensing cables have been tested and found to have certain waterproof and water pressure resistance capabilities. When using them, please follow the following methods for operation and use:
When using, it is recommended to place the temperature sensing cable inside a U-shaped tube for easy maintenance in the future.
If placed outside the U-shaped tube, please handle with care and protect the cable to prevent scratches during installation, in order to maintain the cable's water pressure resistance and service life.
2. The stainless steel body in the cable is the location of the sensor. As the temperature changes slowly, please wait for the measured object to reach thermal equilibrium before measuring during normal use.
3. The cable adopts a three wire bus system, with red indicating positive power supply and recommended 3-5V DC power supply, black indicating negative power supply, and blue indicating signal line. Please strictly follow these instructions for wiring operations.
In theory, the system supports 180 nodes, but in practice, it should be limited to 150 nodes.
5. The system has a certain degree of error correction capability, but the bus cannot be short circuited.
6. System power supply: When the bus distance is within 200 meters, DC9V can be used to power the on-site modules. When the distance is within 500 meters, DC12V can be used to power the system.