ES Series - Rotary Encoder

NegotiableUpdate on 05/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

1. Multiple cylindrical structure options: 38, 52, 62, solid shaft, hollow shaft, semi hollow shaft. 2. Multiple output modes to choose from: voltage output, open collector output, push-pull output, driver output, etc. 3. Compact size, light weight, elastic connection shaft, easy installation, simple wiring, economical and practical, strong anti-interference ability. 4. Pulse count from 10 to 5000 CPR, widely applicable for speed measurement, length measurement, etc. in the light industry, machinery, textile, and cable industries

Product Details

Product features:

1. Multiple cylindrical structure options: 38, 52, 62, solid shaft, hollow shaft, semi hollow shaft
2. Multiple output modes to choose from: voltage output, open collector output, push-pull output, driver output, etc
3. Compact size, light weight, elastic connecting shaft, easy installation, simple wiring, economical and practical, strong anti-interference ability
4. The pulse count ranges from 10 to 5000 CPR and is widely used for speed measurement and length measurement in the light industry, machinery, textile, and cable industries

Schematic diagram of output mode wiring

QQ截图20170215164931

Output waveform

QQ截图20170215164950

Attention:

1. The photoelectric rotary encoder belongs to high-precision instruments, and it is strictly prohibited to strike, drop, or collide during installation. Improper installation can affect its performanceAnd lifespan.

2. The solid shaft of the encoder should avoid rigid connections with external connections, and instead use elastic couplings to prevent the user's shaft from moving or jumping in seriesMoving,

Causing damage to the encoder shaft system and encoder disc.

3. The installation of hollow shaft and motor shaft should have a clearance fit, not too tight or too loose, and the positioning key should not be too tight. It is strictly prohibited to knock or installEnter.
4. It should be ensured that the different axial degrees between the encoder shaft and the user output shaft are less than 0.02mm, and the deviation angle between the two axes is less than 1.5 °
5. Be careful not to exceed the limit speed, as exceeding the limit speed may result in signal loss.
6. Be sure to wire the wires correctly, as incorrect wiring can cause damage to the internal circuit.