Efficient defluorination agent with high fluoride removal rate in deep defluorination water

NegotiableUpdate on 05/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Efficient defluorination agent has a high fluoride removal rate in deep defluorination water. nFC-2 high-efficiency defluorination agent is a liquid agent developed specifically to solve low concentration fluorine-containing wastewater. It is suitable for the treatment of fluoride exceeding standards in various industries, focusing on the deep treatment stage. The effluent is stable and meets the standard below 1mg/L. It is widely used in industries such as coal chemical, mine wastewater, circulating cooling water, electronics, photovoltaics, electroplating (anodizing, etc.), and glass.

Product Details

Efficient defluorination agent with high fluoride removal rate in deep defluorination water

Product Introduction

FC-2 high-efficiency defluoriner is a liquid agent specially developed to solve the problem of low concentration fluorine-containing wastewater. It is suitable for the treatment of fluoride exceeding standards in various industries, focusing on the deep treatment stage. The effluent is stable and meets the standard below 1mg/L. It is widely used in industries such as coal chemical industry, mine wastewater, circulating cooling water, electronics, photovoltaics, electroplating (anodizing, etc.), and glass.

Product Features

ØEfficient defluorination

Stable compliance with fluoride containing wastewater standards for different industriesBelow 1mg/L

ØSimple and quick

No need for complicated adsorption process, the defluorination reaction only requires10-15min

ØLow cost of use

Compared to market technology/Product usage and sludge volume are both 10-20% less

ØExtremely low hardness

The product is specially designed to not block or scale, and can be adapted to zero discharge systems

product metrics

	project	indicator
General indicators	appearance	Brown solution
	effectivecontent/% ≥10.5 5.2	≥32
	pHvalue	1.5~2.5
	Density（20℃，g/cm³）	1.2~1.3
	Mass fraction of water-insoluble substances	≤0.3
Biosafety indicators	Arsenic（As）Quality score/%	≤0.0002
	Chromium（Cr）Quality score/%	≤0.001
	Cadmium（Cd）Quality score/%	≤0.0002
	Lead（Pb）Quality score/%	≤0.001
	Mercury（Hg）Quality score/%	≤0.00001

Instructions for use

(one)a small test:

1. Detecting fluoride content in wastewater;

原水氟含量	dosage(Raw water quantity1L)
≤5mg/L	Fluorine content: defluoriner=1mg/L：0.15mLCalculate usage
5mg/L＜F≤20mg/L	Fluorine content: defluoriner=1mg/L：0.25mLCalculate usage

2. Add liquidFC-2efficientDefluoridation agent (The following dosage can reduce fluoride to1mg/Lbelow)；

3. Stir reaction 10 minute;

4. Adjust with acid or alkali pHValue to6-7；

5. Add a certain amount1‰ of anionsPAMClear separation of mud and water, settling;

6. Detect the fluoride content in the supernatant.

(two)on-site use：

1. Determine the dosage based on the trial results;

2. When treating wastewater on site, add according to the plan provided by our company.

Packaging, Storage, and Precautions

1. 30T tank truck transportation;

2. This product should be stored in a dry, cool, and well ventilated place；

3. productExhibiting acidity(containing a small amount of chloride ions), storage tanks, dosing buckets, pumps, pipelines, etc. should be corrosion-resistant；OptionalPlastic, resin materials, etc. or undergo anti-corrosion treatment.

4. When using, rubber protective gloves should be worn,Wear a filter type protective mask and protective clothing.

Efficient defluorination agent with high fluoride removal rate in deep defluorination water