-
E-mail
412776183@qq.com
-
Phone
18838113686
-
Address
Longzi Lake, Zhengzhou City
Product Categories
- Electric sludge discharge valve
- Electric three-way ball valve
- Pneumatic angle seat valve
- Explosion proof electric control valve
- Pneumatic hard seal ball valve
- Pneumatic high-pressure welded ball valve
- Electric flange butterfly valve
- Pneumatic fluorine lined ball valve
- wafer type butterfly valve
- Pneumatic high-temperature ball valve
- solenoid valve
Henan Hongsen Valve Industry Co., Ltd
Electric sludge discharge valve
NegotiableUpdate on 02/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The HSJ944 electric mud discharge valve consists of three main parts: an angle valve body, a bracket, and an electric head. It is driven by an electric head to open or close the gate. When there is a power outage, it can also be manually opened or closed. There are two types of opening or closing for one valve, and the valve plate is soft sealed. After closing, it has good sealing performance and no leakage.
Product Details
HSJ944Electric sludge discharge valveproductInformation:
HSJ944Electric sludge discharge valve/The electric diaphragm mud discharge valve mainly serves as a shut-off valve on pipelines with liquid and gas as the medium. Used for sludge discharge and sewage discharge on various types of purification equipment, external tanks or pipelines. Suitable for various sedimentation tanks and sludge tanks in water treatment plants, used to discharge sediment, dirt, and wastewater from the water tank. The valve adopts a dual chamber diaphragm structure, which operates without wear and tear, does not leak water due to impurities, and is insensitive to sediment accumulation Lubrication and good sealing performance, using rubber lined valve plate, the valve seat slope opening is not easy to deposit mud and debris, the driving medium pressure is low, and manual or electric centralized control is adopted. Durable and long-lasting.
Work and performance:
HSJ944Electric sludge discharge valveAlso known as an electric diaphragm mud discharge valve, it consists of three main parts: a straight through valve body, a bracket, and an electric head. The valve plate is driven by an electric head to open or close. The mud discharge valve can also be manually opened or closed when there is a power outage. There are two types of valve opening or closing, and the valve plate is soft sealed, with good sealing performance and no leakage after closing.
Purpose:
1. To act as a cutoff on pipelines that supply liquid and gas as the medium.
2. Used for discharging sludge and sewage on various types of purification equipment, external tanks or pipelines.
Working Principle:
Valve opening: The medium (water, gas, oil) enters the lower chamber of the cylinder body through a directional valve (manual four-way valve or solenoid valve), pushes the piston upward, and drives the bottom water stop cover plate to open. At this point, sludge discharge begins, and the amount of sludge discharge increases as the upward distance increases. The medium pushed upward by the piston is discharged through the directional valve while moving upward, completing the entire opening process.
After the valve is closed for sludge discharge, the four-way valve changes direction, and the medium enters the upper chamber of the cylinder body through the four-way valve. The piston is pushed downwards to seal the bottom water stop cover plate and the base, reaching the closed state. The sludge discharge stops, and the medium in the lower chamber of the cylinder body is discharged through the four-way valve discharge hole. At this point, the entire sludge discharge process is completed.
Product actual photo:
