Electronic chemical purified water equipment

1、 Equipment Introduction
Ultra pure water equipment in the electronic chemical industry is mainly used for solvent water in battery industry, chemical analysis, chemical materials, product cleaning, separation, concentration, purification of substances, waste recycling and other occasions. The water quality requirements are relatively low, and the conductivity of pure water is0.1uS/cm-20uS/cmIt can basically meet the requirements. grow luxuriantlyThe foundation of environmental protection in meeting user water standardsOn the basis of this, the water tanks in the equipment system are equipped with liquid level control systems, the water pumps are equipped with pressure protection devices, online water quality detection and control instruments, and electrical systems are usedPLCProgrammable controllers truly achieve unmanned operation, while adopting a unified method of recommendation and customer requirements in process material selection, making the equipment more cost-effective and reliable compared to other similar products.

2、 Design standards and basis

1. Tailored according to the detailed water quality report provided by the user.

2. Technical specifications for water treatment equipment《JB/T 2932-1999》

3. Standard for reverse osmosis water treatment equipment《CJ/T119-2000》

4. Complete set of low-voltage switchgear and control equipment《IEC439-1》

5. Stainless steel welded steel pipes for fluid transportation《GB/T 12771-2008》

3、 Process flow

1、 Raw water - Raw water booster pump - Multi medium filter - Activated carbon filter - Softener - Precision filter - Primary reverse osmosis equipment - Pure water tank - Water point

2、 Raw water - Raw water booster pump - Multi medium filter - Activated carbon filter - Softener - Precision filter - First stage reverse osmosis -PHAdjustment - Intermediate water tank - Second stage reverse osmosis - Purified water tank - Pure water pump - Water point

3、 Raw water - Raw water booster pump - Multi medium filter - Activated carbon filter - Softener - Precision filter - First stage reverse osmosis -PHAdjustment - Intermediate water tank - Second stage reverse osmosis - Purified water tank - Pure water pump -EDISystem - Ultra pure water tank - Pure water pump - Water point

4、 Design Features

1. The system adopts fully automatic control(Manual control can also be used, and automatic backwashing and regeneration programs can be set during system operation;

2. All unit wiring is completed uniformly in the factory, reducing installation and debugging time;

3. The first and second stage reverse osmosis systems are equipped with reflux pipelines, and the reverse osmosis equipment is equipped with chemical cleaning devices;

4. Pipelines are generally usedUPVCtexture of material;

5. Integrated control system and integrated instrument system, etc., facilitate operation and management;

6. ROfilmRegular cleaning Equipped with startup and scheduled cleaningROMembrane function, extendedROMembrane service life;

7. Water recovery rate Through special process design, the equipment's performance has been significantly improvedrate of recovery, up to a maximum of70%；

8. The equipment has an automatic prompt function for consumables replacement, and the replacement cycle of consumables depends on changes in water quality and pressure, rather than the usage time of consumables. Considering the differences in water quality in different regions, the design is more scientific;

9. self-protection The automatic shutdown protection function for source water shortage also has the functions of automatic water production for water tank shortage and automatic shutdown for full water.