Electroplating/anodizing purified water equipment

1、 Equipment Introduction
In the plating and coating industry, in order to increase the surface smoothness, brightness, and adhesion of the plated parts, the preparation of the plating solution requires the use of conductivity15uS/cmThe following pure water is required, and conductivity should also be maintained during rinsing of the plated parts10uS/cmThe following pure water is used for cleaning. The water treatment system in the electroplating industry includes the pure water treatment system required for preparing electroplating solution before electroplating, and the zero discharge system for recycling rare metals in electroplating rinse wastewater.grow luxuriantlyThe foundation of environmental protection in meeting user water standardsOn the basis of this, the water tanks in the equipment system are equipped with liquid level control systems, the water pumps are equipped with pressure protection devices, online water quality detection and control instruments, and electrical systems are usedPLCProgrammable controllers truly achieve unmanned operation, while adopting a unified method of recommendation and customer requirements in process material selection, making the equipment more cost-effective and reliable compared to other similar products.

2、 Design standards and basis

1. Tailored according to the detailed water quality report provided by the user.

2. Technical specifications for water treatment equipment《JB/T 2932-1999》

3. Standard for reverse osmosis water treatment equipment《CJ/T119-2000》

4. Complete set of low-voltage switchgear and control equipment《IEC439-1》

5. Stainless steel welded steel pipes for fluid transportation《GB/T 12771-2008》

3、 Process flow

1、 Raw water - Raw water booster pump - Multi medium filter - Activated carbon filter - Softener - Precision filter - Primary reverse osmosis equipment - Pure water tank-UV sterilizer - water point

2、 Raw water - Raw water booster pump - Multi medium filter - Activated carbon filter - Softener - Precision filter - First stage reverse osmosis -PHAdjustment - intermediate water tank - second stage reverse osmosis - purified water tank - pure water pump - ultraviolet sterilizer - microporous filter—Water point

4、 Design Features

1. The system adopts fully automatic control(Manual control can also be used, and automatic backwashing and regeneration programs can be set during system operation;

2. All unit wiring is completed uniformly in the factory, reducing installation and debugging time;

3. The first and second stage reverse osmosis systems are equipped with reflux pipelines, and the reverse osmosis equipment is equipped with chemical cleaning devices;

4. Pipelines are generally usedUPVCtexture of material;

5. Integrated control system and integrated instrument system, etc., facilitate operation and management;

6. ROfilmRegular cleaning Equipped with startup and scheduled cleaningROMembrane function, extendedROMembrane service life;

7. Water recovery rate Through special process design, the equipment's performance has been significantly improvedrate of recovery, up to a maximum of70%；

8. The equipment has an automatic prompt function for consumables replacement, and the replacement cycle of consumables depends on changes in water quality and pressure, rather than the usage time of consumables. Considering the differences in water quality in different regions, the design is more scientific;

9. self-protection The automatic shutdown protection function for source water shortage also has the functions of automatic water production for water tank shortage and automatic shutdown for full water.

-----------Our company can provide 250L/H~1000T/H industrial pure water equipment. For more parameter information, please consult our online customer service-----------