Electrostatic field measuring instrument

Simco FMX-004 from JapanElectrostatic field measuring instrument

FMX-004Electrostatic field measuring instrumentIt is a lightweight and compact handheld deviceElectrostatic field measuring instrumentLocate and measure static charges on any surface. Its bag size is easy to carry, and the four operation buttons are also very easy to use.

Simco FMX-004 from JapanElectrostatic field measuring instrumentThe static voltage within ± 30 kV can be measured at a distance of 1 inch, and the results are displayed synchronously on both digital and bar charts. 4 buttons - POWER power switch, ZERO zero adjustment, MODE working mode, and HOLD data lock. The HOLD button allows LCD display to lock and save data, which is very useful, especially when it is difficult to read data at the measurement location.

Two LEDs form a distance measurement lamp to confirm the correct measurement distance, and the conductive packaging shell and grounding buckle can be connected to the working grounding point, allowing FMX-004 to obtain more accurate measurement values. At the same time, its circuit design ensures that it can operate under ion gas flow.

Simco FMX-004 from JapanElectrostatic field measuring instrumentfeature

• Display of numerical and color bar charts

• Lightweight and compact design

• Distance measuring lamp

• Sound alarm function •

• Battery operation and automatic shutdown function

Analogous output

Simco FMX-004Electrostatic field measuring instrumentadvantage

Easy to read in low light environments

• Convenient to use in hard to reach areas

• Ensure accurate testing distance and readings

• Convenient function selection and legitimate operation confirmation

Extend battery life, efficient and energy-saving

The output signal can be connected to a chart recorder or similar device to print the static charge level, and recorded and stored in paper format

Simco FMX-004 from JapanElectrostatic field measuring instrumentProduct Specifications

Testing Scope Low range 0 to ± 1.49 kV; high range ± 1.0 kV to ± 30 kV

Balance detection 0 to ± 300V

Detection distance 1 "± 0.2" (25 mm ± 0.5 mm); LED distance measuring lamp (to determine charged surfaces andElectrostatic field measuring instrumentThe distance)

Response<1 second

Accuracy ± 10%

LCD display bar chart: positive polarity - red, negative polarity - blue

LCD display updates 5 times per second

Bar chart represents automatic adjustment: low range ± 0.1 kV; high range ± 2 kV; ion balance ± 20V

Digital display with 3 digits; Measurement automatic adjustment (low range x.xx=0 to ± 1.49 kV; high range xx. x=± 1.0 kV to ± 30.0 kV; ion balance xxx=0 to 300); [HOLD] - Measurement data lock; [A.OFF] - Automatic shutdown not activated; [Err] - Sensor damaged; Four segment display of battery consumption

Sound alarm POWER ON power on -1 sound; Pressing the power switch for more than 3 seconds -3 beeps - indicates POWER ON and AUTO-OFF is turned off; When the automatic shutdown is AUTO OFF, there should be a short beep every second within 5 seconds; When the measurement range is exceeded, there will be a continuous audible alarm

The power will automatically shut down within 5 minutes; If this function is not activated, it will display [A.OFF]

Operating environment 10-40 ° C, 0-60% RH (non condensing)

Power input 9V, 6F22Y, DC alkaline battery

Battery usage for approximately 30 hours

Encapsulation of Conductive Resin (ABS)

Volume 123 x 73 x 25 mm

Weight 0.17 kg

Two year limited warranty period

Simco FMX-004 from JapanElectrostatic field measuring instrumentOrder Information

91-FMX-004 FMX-004Electrostatic field measuring instrumentConnect test tablet

33-2004Analog output cable and bracket kit

Simco FMX-004 from JapanElectrostatic field measuring instrumentSpecial Features

FMX-004Electrostatic field measuring instrumentThe measurement range is ± 30 kV at a standard distance of 1 inch, and the results are displayed synchronously on both digital and two-color bar charts, while also showing the battery condition. The power switch, zero point adjustment, ion balance operation mode, and data locking are all operated by pressing. The HOLD button allows for locking and saving data, which is very useful when it is difficult to read data at the measurement position.

Two LEDs form a distance measuring lamp to confirm the correct testing distance. The conductive packaging shell and grounding buckle can be connected to the working grounding point to obtain more accurate measurement values. The circuit design of FMX-004 ensures that it can work under ion airflow.

Simco FMX-004 from JapanElectrostatic field measuring instrumentAnalogous output

FMX-004Electrostatic field measuring instrumentThere is an optional data analog output wiring and bracket kit, which allows the FMX-004 to be fixed for continuous measurement. Analog output wiring can output data to PLCs, data acquisition cards, data loggers, chart readers, or other devices for storage and analysis.

Instrument maintenance

Like other instruments, regular tuning is necessary to obtain accurate data. It is recommended to tune FMX-004 once a year. Simco Ion can provide tuning and validation certificate (with optional data) services.