Explosion proof substation box model: Dust explosion-proof 304 stainless steel Weitu cabinet

Explosion proof substation box model: Dust explosion-proof 304 stainless steel Weitu cabinet

1. Name: Explosion proof substation box
2. Model: Dust Explosion proof Type 600 × 600 × 210
3. Basic form, material, and specifications: 304 stainless steel
4. Meet the explosion-proof requirements and standards of the project

1. Name: Electric Control Box
2. Model: Dust Explosion proof Type 800

×600×2100
3. Basic form, material, and specifications: Carbon steel spray coating
4. Meet the explosion-proof requirements and standards of the project

1. Name: On site explosion-proof emergency stop button
2. Specification: Dust Explosion proof Type
3. Installation method: independent installation method, with box
4. Explosion proof substation box model: Dust explosion-proof 304 stainless steel Weitu cabinet meets the explosion-proof requirements and standards of the project

1. Name: Explosion proof Spray Control Box
2. Model: Dust Explosion proof Type 400 × 500 × 200
3. Basic form, material, and specifications: cast aluminum
4. Meet the explosion-proof requirements and standards of the project

1. Name: Explosion proof solenoid valve box
2. Specification: Power supply voltage: DC220V; Power: 22W
3. Explosion proof requirements: NEMA7&9

1. Name: Explosion proof Flexible Connecting Pipe
2. Specification: DN15
3. Connection method: Each set includes approximately 0.7m long explosion-proof flexible connecting pipe and 2 explosion-proof pipe joints
4. Material: Nylon, flame retardant

1. The size of the installation version of the electrical control cabinet is 700 * 1500;

2. The maximum depth of the installation version components is 250mm;

3. Need to add air conditioning;

4. Need to add a 7-inch touch screen and explosion-proof mouse;

5. Install alarm lights on the top;

6. Two rows of explosion-proof buttons, approximately 10, need to be added to the lower side of the touch screen;

7. The top 4 corners of the cabinet need to have lifting rings;

8. The bottom support leg should have a sealing plate, and the back sealing plate needs to have holes for wiring;

9. Braking resistor, triggered once every two minutes on average, with a single heating time of 20 seconds. The maximum expected temperature when the resistor heats up is 60-70 degrees Celsius.

Based on the above requirements, first determine the cabinet size;

2. Top lifting ring hole diagram;

3. Diagram of fixed holes for supporting legs;