FKC-1B Floating Bacteria Sampler Source Water Purification Air Microbial Sampler

FKC-1B planktonic bacteria sampler for source water purification

(FKC-1B Floating Bacteria Sampler High Precision Upgraded Version)

1Introduction to Principles

FKC-1BThe type of planktonic bacteria sampler is an efficient porous inhalation dust and bacteria sampler.Newly upgraded touch operating system with fast response and user-friendly human-computer interaction interface. instrumentDesign based on the theory of isokinetic samplingThe sampling is direct, and the wind speed at the collection head is basically consistent with the wind speed in the clean room, which can more accurately reflect the microbial concentration in the clean room. During sampling, air with dust and bacteria passes through at high speedSampling head mouthMicro pores, evenly impacting the agar surface inside the culture dish; These live microorganisms are on the surface of agarFully uniformObtaining nutrients, rapid dynamic rehydration occurs during the cultivation process, resulting in high-speed growth and faster yield of results.

IIUsage environment

1．Wen Degree:10--35℃

2．relative humidity10--90﹪RH

3．Atmospheric pressure:80-110kPa

4．Maximum dust concentration:100000000 pieces/m ³ 0.5 µ m or 0.2mg/m ³

IIIMain features and parameters

1．Sampling head口To evenly distribute microorganisms on the surface of agar through numerous micropores, Reduced the overlap of dust and bacteria, and lowered the error in microbial counting.

2．CTP 2.8 Interactive System

3．Sampling traffic:100L/min。

4．Sampling head flow rate:0.38m/s is basically the same as the wind speed in the clean room (constant velocity sampling).

5．pick sample Quantity:The sampling amount can be obtained from1—9999LAny setting.

6．cultivate raise Dish:Use standard universal culture dishesΦ90*15

7．electricity Source:DC16.8V。

8. Continuous working time: 14 hours

9. Data export: USB

10. Remote start: Yes

11．Overall dimensions: Φ120*325 。

12．heavy Quantity: 2.7kg

4、 Structural Characteristics Description

1. The sampler consists of two parts: the sampling head, the culture dish holder, the sampling pump, the sampling pump holder, and the sampling pump power supply. The lower part is the control board, memoryLCD touch controlMonitor, keyboardCharging portUSB interfacebattery module、Plus remote control.

2. The sampler can be used for both AC and DC, and there is a power socket and data cable interface at the bottom of the instrument. When using DC, the switch is turned on and powered by the battery; When used for communication, insert the randomly configured 16.8V power adapter into the above-mentioned socket. When the switch is not turned on, it is in a charging state. When the switch is turned on, it is powered by the 16.8V power adapter and maintained in a charging state.

FKC-1B planktonic bacteria sampler for source water purification