FPZ polypropylene self-priming pump

FPZ engineering plastic self-priming pump, made of polypropylene (CFR-PP) molded in one go, has high mechanical strength and good corrosion resistance. The self-priming pump has a unique scientific structure, with an even suction chamber, gas-liquid separation chamber, and reflux hole in the pump chamber. It only needs to be filled with liquid before starting up, so there is no need to repeat the liquid introduction. When sucking and delivering the ring, the liquid can be intermittently injected, and the liquid can continue to be sucked within 15 minutes of the broken page. The mechanical seal does not require additional cooling water for cooling, is easy to operate, safe and leak free. It is a high-quality product that replaces the submersible pump. FP material: good airtightness, good non toxicity, non toxicity, non pollution, anti oxygen aging, good mechanical performance. Resistant to strong oxidants, FPZ material: non-toxic, non polluting, resistant to general acids, bases, and salts
Working temperature: not exceeding 80 degrees Celsius.
Attention: Air freight transfer is prohibited
Performance parameters

Specification and model	internet traffic(m3/h)	lift(m)	Self priming height(m)	rotational speed(r/min)	caliber(m)		Motor PowerKW
					Import	Export
25FPZ-10	2.5	10	5	2900	25	20	0.55
32FPZ-10	3.4	10	5	2900	32	25	0.75
40FPZ-10	11	15	5	2900	40	32	1.5
50FPZ-10	13	20	5	2900	50	40	2.2
65FPZ-10	26	25	5	2900	65	50	4
80FPZ-10	50	32	5	2900	80	65	7.5
100FPZ-10	100	40	5	2900	100	285	11