FT30C type fiberglass external axial flow fan

Product Introduction

• The FT30C fiberglass external axial flow fan has the characteristics of reasonable structure, simple design, high static pressure and efficiency, good anti-corrosion performance, low noise, smooth operation, low mechanical vibration, and smooth airflow. This series of fan motors are assembled on the upper part of the fan cylinder, with adjustable motor support plates and angle belt transmission, so as to isolate various corrosion-resistant gases conveyed by the fan from the motor and ensure the service life of the motor. The air duct adopts an outer groove spherical universal bearing seat, which has the advantages of small volume and good sealing performance. This series of fans is mainly suitable for general industrial pipeline series pressurization, air supply, and exhaust use. The transported gas is not allowed to contain viscous substances, dust and hard particles ≤ 150mg/m3, gas temperature ≤ 60 ℃, and relative humidity ≤ 100%.

  Machine number Size(NO)	Power Power(KW)	Rotational speed Speed(r/min)	Traffic volume volumeFlow(M3/h)	Full pressure TotalPressure(Pa)
  3.5C	0.55	1450	2500	40
  4C	0.75	1450	4000	86
  	0.55	1450	3500	66
  5C	1.5	1450	8460	100
  	1.1	1450	7667	82
  6C	1.5	1450	11590	123
  	2.2	1450	14000	179
  7C	3	1450	19000	226
  8C	4	1450	24500	221