fire pump

NegotiableUpdate on 03/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Fire pump product introduction Fire pump refers to a dedicated fire pump or a regular clean water pump that meets the national standard "Performance Requirements and Test Methods for Fire Pumps" GB6245

Product Details

fire pump

Product Introduction

Fire pump refers to a specialized water pumpfire pumpOr ordinary clean water pumps that meet the national standard "Performance Requirements and Test Methods for Fire Pumps" GB6245. Most fire water sources provide firefighting water that requires pressurization by fire pumps to meet the water pressure requirements during firefighting

Most fire water sources provideFire water supplyFire pumps are required to increase pressure to meet the requirements for water pressure and volume during firefighting. The malfunction of the water pump due to improper setting and maintenance will inevitably affect firefighting and rescue, causing unnecessary losses. Requirements for water quantity.

Main Features

1. The pump has a compact structure, small volume, and beautiful appearance. Its structure determines that the installation area is small. If a protective cover is added, it can be placed outdoors for use. 2. The impeller is directly installed on the motor shaft to ensure the concentricity of the pump, thereby enhancing the operational stability of the pump and extending its service life.

3. The shaft seal adopts mechanical seal or a combination of mechanical seals, and uses high-quality alloy sealing rings to enhance the wear resistance of the seal and effectively extend its service life.

4. Easy installation and maintenance, no need to disassemble the piping system. The inlet and outlet of the pump have the same diameter, simplifying the connection of the pipeline.
5. Pumps can be operated in series or parallel according to the needs of flow rate and head.

6. The suction and discharge ports can be installed in different directions such as 0 °, 90 °, 180 °, and 270 ° as needed to meet different connection scenarios.

7. The pump head can be increased or decreased according to the needs of the water pump stage and combined with the outer diameter of the cutting impeller to meet the requirements, without changing the installation footprint.

Instructions for Use

　　Before startup:1. Rotate the coupling by hand, and there should be no jamming of the rotor components.Open the inlet valve and exhaust valve to fill the pump chamber with water, and then close the exhaust valve;Jog the motor to determine if the direction of rotation is correct;

function:

1. Fully open the inlet valve and close the outlet pipeline valve.

2. Connect the power supply, and when the pump speed reaches normal, open the outlet pipeline valve and adjust it to the desired operating point;

3. Observe whether there are any abnormal situations after the pump is running. If there are any abnormal situations, stop the pump immediately for inspection, handle them before running again;