Flat elliptical bag cage skeleton of electric bag composite dust collector

2. Processing equipment:Flat elliptical bag cage skeleton of electric bag composite dust collectorThe high-frequency welding machine can weld the bag cage in one go, effectively ensuring a smooth and straight surface of the skeleton, uniform welding, firm welding points, and no detachment, virtual welding, or leakage of welding.
2.2 The design, material, processing technology, surface treatment, inspection, packaging, and transportation of the elliptical bag cage skeleton of the electric bag composite dust collector shall be carried out in accordance with industry standards. _It has good elasticity, strength, rigidity, and accuracy, with a smooth and burr free surface, which is conducive to improving the service life of the filter bag, with a service life of 20000 hours.
2.3 The flat elliptical bag cage of the electric bag composite dust collector is made of treated carbon steel. The material of the bag cage is # 20 steel. The bag cage design is lightweight and sturdy, with evenly distributed longitudinal bars and anti support rings. It uses 32 Ø 3.2mm carbon steel longitudinal bar lines, and the spacing between the anti support surrounding bar lines is 200mm.
If the elliptical bag cage skeleton of the 2.4 electric bag composite dust collector is designed in sections. The bag cage connection adopts a simple internal locking device that does not require special tools. The upper part of the bag cage will be connected to a 1.2mm thick carbon steel ring, and no tools are required to lock the bag opening of the filter bag onto the flower plate hole. Even if maintenance personnel walk on the flower board surface, it will not cause damage.
The flat elliptical bag cage skeleton of the 2.5 electric bag composite dust collector is made by an automatic assembly line, with firm welding points, no burrs, and wear-resistant and corrosion-resistant cage bones. There is no scratch on the filter bag at the connection between the flower board and the bag cage. The bag cage is easy to disassemble and has sufficient strength to prevent welding detachment. After the bag cage and filter bag are assembled, they are hung evenly on the flower board.
The longitudinal bars and back support rings of the flat elliptical bag cage skeleton of the 2.6 electric bag composite dust collector have sufficient strength and rigidity to withstand the gas pressure of the filter bag during filtration and dust cleaning. After running under negative pressure of 3000Pa for 1 hour, the plastic deformation is less than 3mm, and there is no detachment of the welding points. It can prevent damage and deformation caused by collisions and impacts during normal transportation and installation.
The installation of the flat elliptical bag cage skeleton of the 2.7 electric bag composite dust collector does not require special tools, and the concentricity shall not be lower than the specifications and standards.
The surface anti-corrosion treatment of the flat elliptical bag cage skeleton of the 2.8 electric bag composite dust collector adopts organic silicon surface spraying treatment, with a coating thickness not exceeding 50 μ m.