Flat skeleton, trapezoidal skeleton _ Manufacturing

NegotiableUpdate on 07/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Flat frame, abbreviated as bag frame or dust removal frame, also known as dust removal frame, filter cage, bag cage, or dust removal bag frame, is a bag filter accessory that is welded in one go using specialized equipment. After treatment, the surface is galvanized or sprayed, or other coatings can be applied according to different customer requirements.

Product Details

Dust collector frame, also known as bag frame, filter cage, bag cage, or dust bag frame, is a bag filter accessory that is welded in one go using specialized equipment. After treatment, the surface is galvanized or sprayed, or other coatings can be applied according to different customer requirements.

Flat skeletonRequirements for the production of trapezoidal skeleton

A.Flat skeletonThe production of trapezoidal skeleton requires uniform distribution of support rings and longitudinal bars, as well as sufficient strength and rigidity. The wire used for Jincheng Company's skeleton is domestic carbon steel Q235, with a diameter of 5-6mm. The wire steel is drawn to the required diameter by the equipment straightening machine to meet the requirements of strength and straightness. It can withstand the gas pressure of the filter bag in the filtering and cleaning state, and prevent damage and deformation caused by collisions and impacts during normal transportation and installation;
B. Adopting the industry's multi weld one-time high-frequency spot welding machine, 8-22 vertical bars can be welded at once, and all welding points of the skeleton are firmly welded without any detachment Virtual soldering and solder leakage; As shown in Figure 4
C. The surface of the skeleton in contact with the filter bag should be smooth and clean, and no welding scars are allowed Unevenness and burrs;
D. The straightness of the skeleton axis is less than 24mm/meter. The Venturi tube is concentric with the cap, and the welding points are firm;
E、 The skeleton is made of galvanized wire and reinforced rings with a diameter of 4mm. For skeletons with a diameter of 145mm or less, 10 bars are evenly distributed, and reinforced rings with a diameter of 15-20mm are evenly distributed; 12 uniformly distributed reinforcement bars with a skeleton diameter of 145mm or more, and reinforced rings uniformly distributed with a diameter of 15-20mm;
F. The spring-loaded skeleton should have sufficient number of turns and elasticity, and the spacing should be uniform when pulled apart;

G. Flat skeleton, trapezoidal skeleton surface treated with electroplating zinc according to different needs Spray coating or silicone post-treatment should meet the temperature requirements for use;

Qingyuan Environmental Protection Company produces various specifications of flat frames for dust collectors, which are sturdy, pressure resistant, smooth, and free of burrs, and can be molded in one go. It is also possible to achieve galvanized skeleton and organic silicon treatment according to the other party's requirements. Highly praised by a large number of users.