D341F-16C is a fluorine lined flange butterfly valve. The valve body is made of carbon steel material, and the valve seat is sealed with polytetrafluoroethylene, with a nominal pressure of 1.6MPa. Easy to operate, reliable in sealing, capable of cutting off or adjusting flow rate, suitable for corrosive media such as water, oil, and sulfuric acid, used in low-pressure conditions such as water supply and drainage, chemical industry, etc.
Fluorine lined flange butterfly valve
D341F-16CFluorine lined flange butterfly valveIt is a universal midline soft seal butterfly valve that focuses on stable sealing and convenient operation under low pressure conditions, widely used in civil and industrial basic fluid control scenarios.
DThe representative valve type is butterfly valve.
3The transmission mode is worm gear transmission, with small switching torque and easy operation.
4The connection form is flange connection, which is easy to install and disassemble and suitable for general pipeline systems.
1The representative structural form is a medium line type, with the center of the valve plate coinciding with the axis of the valve stem, resulting in low flow resistance.
FThe sealing surface material is fluoroplastic (such as PTFE), which is resistant to acid and alkali corrosion and has excellent sealing performance.
16The nominal pressure is 1.6MPa, suitable for low-pressure pipeline systems.
CThe valve body material is carbon steel, with high strength and moderate cost, suitable for non corrosive media such as water and oil.
Fluid controlBy driving the valve plate to rotate 0-90 ° through the worm gear, the pipeline medium can be quickly cut off, and the medium flow rate can be accurately adjusted by fine-tuning the valve plate angle to meet the flow control requirements under different working conditions.
leak-proof sealingUsing fluoroplastic (such as PTFE) sealing surface and a medium linear structure design, it can effectively block medium leakage and maintain reliable sealing even in low-pressure (1.6MPa) environments, avoiding medium waste or environmental pollution.
Corrosion resistant adaptationThe combination of fluoroplastic sealing surface and carbon steel valve body can withstand non corrosive media such as water, oil, weak acid alkali, etc., reducing the erosion of media on the valve and extending its service life.
civil sector
Construction industry: used for water supply and drainage pipelines in residential communities and commercial buildings, controlling the transportation and shutdown of domestic and fire-fighting water; It is also suitable for central air conditioning water circulation systems, heating pipelines, and regulating the flow of cold and hot media to stabilize indoor temperature.
Municipal industry: Adapt to municipal water supply and drainage pipelines, pre-treatment stage pipelines of sewage treatment plants, and control the transportation and diversion of sewage and rainwater.
industrial sector
Light industry: such as food processing and textile industry, used for pipeline control of ordinary process water, lubricating oil and other media in the workshop, to avoid impurity pollution or medium leakage affecting production.
Chemical industry: Suitable for auxiliary pipelines under low pressure and non strong corrosive conditions, such as transporting ordinary solvents and diluted acid-base solutions, avoiding strong corrosive media such as concentrated acid and alkali.
Energy industry: Used for low-pressure steam auxiliary pipelines in small thermal power plants and boiler rooms, or for ordinary oil transportation pipelines in gas stations and oil storage tanks, to control medium circulation and cutoff.
