Fluoroplastic alloy chemical centrifugal pump

Fluoroplastic alloy chemical centrifugal pumpOverview:

Xin'anjiang FSB fluoroplastic alloy centrifugal pump, with all flow passage parts made of fluoroplastic alloy, has the advantages of compact structure, reliable sealing, long service life, high strength, anti-aging, toxin free decomposition, good corrosion resistance, etc.

Fluoroplastic alloy chemical centrifugal pumpFeatures:

All overcurrent components are made of fluoroplastic alloy, with a compact structure Easy to operate; Suitable temperature range: -50 ℃ to 160 ℃. It can transport any acid, alkali, salt solution, strong oxidant, organic solvent, and other strong corrosive media without particles (except for high-temperature molten alkali metals, elemental fluorine, etc.). When the temperature of the conveyed liquid exceeds 100 ℃, the machine seal is equipped with a cooling water device, which can extend the service life of the machine seal.

Applicable use:

This fluoroplastic centrifugal pump is suitable for acid washing and painting processes in automobile manufacturing; Electrolyte transportation in non-ferrous metal smelting; The process flow of chlorine water, wastewater treatment, and acid addition in the ion exchange membrane caustic soda project. Suitable for transporting liquids in industries such as petroleum, chemical, pharmaceutical, pesticide, pickling, dyeing, painting, smelting, papermaking, electroplating, and food.

Usage Notes

1. General mechanical seals are suitable for clean media without suspended hard particles. If there are particles, please inform us in advance when signing the contract. The newly installed series of pipelines and liquid storage tanks should be thoroughly flushed to prevent solid particles from entering the sealing end face and causing sealing failure.

2. When using mechanical seals in crystalline media, it is important to regularly flush them. Before restarting after parking, ensure that the crystal on the sealing end face is thoroughly flushed.

3. Disassembling mechanical seals should be done carefully, and it is not allowed to forcefully strike them with hammers, iron tools, or other objects to avoid damaging the dynamic and static sealing surfaces.

4. If the dirt on the mechanical seal cannot be removed after long-term use, do not forcefully strike it. Efforts should be made to remove dirt, rinse thoroughly, and then disassemble to ensure that the components are intact and undamaged.

Model meaning

80 — FS — B - 30 — (D)

80- Import diameter (80mm)

FS - The pump flow passage is made of fluoroplastic

B - Single stage single suction cantilever centrifugal pump

30- Head (30m)

(D) - Direct connection type

performance parameters