Four door high-temperature aging test chamber

Four door high-temperature aging test chamberIt is a high-performance and highly reliable oven with well-designed structure, material, strength, insulation, and air circulation. It also has a beautiful appearance and easy operation. Hot air circulation system, the air source is driven by a circulation motor to drive the wind wheel through an electric heater, and the hot air is sent to the inside of the oven through the air duct. After use, the air is sucked into the air duct to become the air source for further circulation and heating, which saves energy and has good temperature uniformity. When the door opens or closes and causes disturbance, the air supply circulation system can quickly restore the operating temperature value.

1、 Main features:

1. Suitable for various preheating, drying, shaping, etc. in shoemaking, chemical, woodworking, electronics, motors, printing, electroplating, etc;

2. Material: The interior of the box is made of SS41 steel plate, and the exterior is treated with SS41 steel plate baking paint and advanced insulation rock wool six sided insulation treatment;

3. The temperature control adopts an electronic temperature automatic controller and adopts single-sided horizontal circulation heating, with a maximum temperature of 250 ℃, equipped with over temperature protection device and warning device;

4. This oven is an automatic convection cycle operation that can soften EVA and PVC materials in a short period of time to achieve a pressing effect. The temperature and baking time can be adjusted according to demand, saving electricity and speed.

2、 Core application:

1. Research fields: durability testing of aerospace components, material research in universities, etc;

2. Quality control: testing the performance stability of electronic components, equipment, and new energy materials;

3. Aging test: Simulate long-term high temperature environment to accelerate the evaluation of product life (such as rubber and plastic thermal aging).

3、 Oven material:

1. Oven material: Outer wall material: Steel plate baked paint;

2. Inner wall material: stainless steel 304, galvanized sheet;

3. Oven insulation material: flame retardant and fire-resistant rigid polyurethane foam;

4. Door insulation material: flame retardant and fire-resistant rigid polyurethane foam.

4Four door high-temperature aging test chamberMeet the test standards:

1. GB/T 2423.2-2001 Test B: High temperature test method;

2. GJB 150.3-1986 High temperature test;

3. IEC68-2-2 Test B: Dry Heat;

4. GB 11158 Technical Conditions for High Temperature Test Chambers;

5. GB/T 2423.2 "Basic Environmental Testing Procedures for Electrical and Electronic Products - Test B: High Temperature Test Method", etc.