-
E-mail
oubeihaiyang.1688.com
-
Phone
13676799385
-
Address
No. 245 Linxia Road, Zhangbao Industrial Zone, Sanqiao Industrial Park, Wenzhou
Product Categories
Yongjia County Marine Water Pump Factory
G-type vertical clear water pipeline shielded pump
NegotiableUpdate on 03/18
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The G-type vertical clear water pipeline shielded pump adopts a unique structure of fully enclosed and no mechanical seal. The stator and rotor are shielded and sealed with stainless steel sleeves, allowing the conveyed liquid to enter the motor for internal cooling. This solves the problems of medium leakage, environmental pollution, poor operational reliability, and difficult maintenance caused by the use of mechanical seals in ordinary pipeline electric pumps. The rotating part is supported by stone mill bearings and lubricated with conveying medium, which is a low-noise, green and environmentally friendly upgraded product. Due to its advantages of low noise, no leakage, reliable operation, and maintenance free, it has gained the trust of users. The G series shielded electric pump is mainly used for HVAC cold and hot water circulation, industrial and urban building water supply, fire pipeline pressurization, long-distance water delivery and other occasions.
Product Details
Model significance
Characteristics and Applications
The G-type vertical clear water pipeline shielded pump adopts a unique structure of fully enclosed and no mechanical seal. The stator and rotor are shielded and sealed with stainless steel sleeves, allowing the conveyed liquid to enter the motor for internal cooling. This solves the problems of medium leakage, environmental pollution, poor operational reliability, and difficult maintenance caused by the use of mechanical seals in ordinary pipeline electric pumps. The rotating part is supported by stone mill bearings and lubricated with conveying medium, which is a low-noise, green and environmentally friendly upgraded product. Due to its advantages of low noise, no leakage, reliable operation, and maintenance free, it has gained the trust of users. The G series shielded electric pump is mainly used for HVAC cold and hot water circulation, industrial and urban building water supply, fire pipeline pressurization, long-distance water delivery and other occasions.
working conditions
1. The flow range of this series is 1-1080m3/h, and the flow range of Yangcheng is 5-105m.
2. The pressure of the electric pump system is 1.0MPa (or 1.6MPa), which is the sum of the pump suction pressure and Yangcheng pressure. When the user requests a system pressure higher than 1.0MPa, it must be separately stated when ordering.
3. The conveying medium is clean water or a liquid with physical and chemical properties similar to water, with a medium temperature of 95 ° C (N and NY types) or 150 ° C (GY type). If the user chooses GY type, an external circulating cooling water system must be separately configured; When the temperature of the medium is below 20 ° C, it must be raised separately when ordering, and our company will take special process measures.
structural diagram
 |
serial number |
name |
serial number |
name |
serial number |
name |
1 |
Upper Bearing Housing |
6 |
Graphite bearing sleeve |
11 |
axis |
|
2 |
base |
7 |
Drainage pipe |
12 |
Stator shielding sleeve |
|
3 |
Wire junction box |
8 |
thrust bearing |
13 |
Rotor shielded pump |
|
4 |
pump body |
9 |
Axion |
14 |
Lower bearing seat |
|
5 |
base |
10 |
stator |
15 |
impeller |
performance parameters
model |
Flow rate (m3/h) |
Yang Cheng (m) |
Power (kw) |
Voltage (v) |
Frequency (Hz) |
Current A |
Speed min |
Noise dB |
Inhalation caliber |
Discharge caliber |
Weight kg |
G5-12-0.75N |
5 |
12 |
0.75 |
380 |
50 |
2.5 |
1500 |
45 |
40 |
40 |
65 |
G5-15-1.3NY |
5 |
15 |
1.3 |
380 |
50 |
4.15 |
1500 |
45 |
50 |
50 |
82 |
G5.6-16-1.3NY |
5.6 |
16 |
1.3 |
380 |
50 |
4.15 |
1500 |
45 |
50 |
50 |
82 |
G6.3-4-0.18NY |
6.3 |
4 |
0.18 |
380 |
50 |
1.0 |
1500 |
45 |
40 |
40 |
36 |
G6.3-12.5-0.75N |
6.3 |
12.5 |
0.75 |
380 |
50 |
2.5 |
1500 |
45 |
40 |
40 |
65 |
G6.3-20-1.8NY |
6.3 |
20 |
1.8 |
380 |
50 |
5.3 |
1500 |
50 |
40 |
40 |
105 |
G9-20-1.8NY |
9 |
20 |
1.8 |
380 |
50 |
5.3 |
1500 |
50 |
50 |
50 |
108 |
G11-2-0.18N |
11 |
2 |
0.18 |
380 |
50 |
1.0 |
1500 |
45 |
50 |
50 |
35 |
G11-10-0.75NY |
11 |
10 |
0.75 |
380 |
50 |
2.6 |
1500 |
45 |
50 |
50 |
68 |
G11.6-28-3NY |
11.6 |
28 |
3 |
380 |
50 |
8.0 |
1500 |
50 |
50 |
50 |
140 |
G12.5-5-0.45N |
12.5 |
5 |
0.45 |
380 |
50 |
1.5 |
1500 |
45 |
50 |
50 |
46 |
G12.5-12.5-1.1N |
12.5 |
12.5 |
1.1 |
380 |
50 |
3.5 |
1500 |
45 |
50 |
50 |
70 |
G12.5-20-2.2NY |
12.5 |
20 |
2.2 |
380 |
50 |
6.4 |
1500 |
50 |
50 |
50 |
110 |
G12.5-32-4NY |
12.5 |
32 |
4 |
380 |
50 |
11.3 |
1500 |
50 |
50 |
50 |
203 |
model |
Flow rate (m3/h) |
Yang Cheng (m) |
Power (kw) |
Voltage (v) |
Frequency (Hz) |
Current A |
Speed min |
Noise dB |
Inhalation caliber |
Discharge caliber |
Weight kg |
G18-16-2.2NY |
18 |
16 |
2.2 |
380 |
50 |
6.4 |
1500 |
50 |
50 |
50 |
113 |
G20-10-1.3N |
20 |
10 |
1.3 |
380 |
50 |
4.15 |
1500 |
45 |
65 |
65 |
80 |
G20-10-1.3NY |
20 |
10 |
1.3 |
380 |
50 |
4.15 |
150 |
45 |
65 |
65 |
80 |
G20-20-3NY |
20 |
20 |
3 |
380 |
50 |
8.4 |
1500 |
50 |
65 |
65 |
125 |
G22-16-2.2NY |
22 |
16 |
2.2 |
380 |
50 |
6.4 |
1500 |
50 |
65 |
65 |
120 |
G25-12.5-1.8NY |
25 |
12.5 |
1.8 |
380 |
50 |
5.3 |
1500 |
50 |
65 |
65 |
106 |
G25-20-3NY |
25 |
20 |
3 |
380 |
50 |
8.4 |
1500 |
50 |
65 |
65 |
125 |
G27-7-1.1N |
27 |
7 |
1.1 |
380 |
50 |
3.5 |
1500 |
45 |
65 |
65 |
73 |
G40-10-2.2NY |
40 |
10 |
2.2 |
380 |
50 |
6.4 |
1500 |
50 |
100 |
100 |
120 |
G45-30-9NY |
40 |
30 |
9 |
380 |
50 |
23.6 |
1500 |
60 |
100 |
100 |
300 |
G50-12.5-3NY |
50 |
12.5 |
3 |
380 |
50 |
8.4 |
1500 |
50 |
100 |
100 |
140 |
G50-20-5.5NY |
50 |
20 |
5.5 |
380 |
50 |
14.3 |
1500 |
55 |
100 |
100 |
225 |
G50-32-9N |
50 |
32 |
9 |
380 |
50 |
23.6 |
1500 |
60 |
100 |
100 |
300 |
G60-32-9NY |
60 |
32 |
9 |
380 |
50 |
23.6 |
1500 |
60 |
100 |
100 |
300 |
model |
Flow rate (m3/h) |
Yang Cheng (m) |
Power (kw) |
Voltage (v) |
Frequency (Hz) |
Current A |
Speed min |
Noise dB |
Inhalation caliber |
Discharge caliber |
Weight kg |
G75-17.5-7.5NY |
75 |
17.5 |
7.5 |
380 |
50 |
19.8 |
1500 |
55 |
125 |
125 |
262 |
G75-27-11NY |
75 |
27 |
11 |
380 |
50 |
28.8 |
1500 |
60 |
125 |
125 |
350 |
G80-20-7.5NY |
80 |
20 |
7.5 |
380 |
50 |
20 |
1500 |
55 |
125 |
125 |
262 |
G80-32-13NY |
80 |
32 |
13 |
380 |
50 |
33.8 |
1500 |
60 |
125 |
125 |
373 |
G80-40-18.5NY |
80 |
40 |
18.5 |
380 |
50 |
46.2 |
1500 |
65 |
125 |
125 |
420 |
G100-20-9NY |
100 |
20 |
9 |
380 |
50 |
23.6 |
1500 |
60 |
125 |
125 |
310 |
G100-27-11NY |
100 |
27 |
11 |
380 |
50 |
28.8 |
1500 |
60 |
125 |
125 |
350 |
G100-32-15NY |
100 |
32 |
15 |
380 |
50 |
38.4 |
1500 |
60 |
125 |
125 |
380 |
G100-40-22NY |
100 |
40 |
22 |
380 |
50 |
54.2 |
1500 |
65 |
125 |
125 |
450 |
G100-50-25NY |
100 |
50 |
25 |
380 |
50 |
61 |
1500 |
65 |
125 |
125 |
495 |
G125-20-13NY |
125 |
20 |
13 |
380 |
50 |
33.7 |
1500 |
60 |
125 |
125 |
373 |
G125-32-22NY |
125 |
32 |
22 |
380 |
50 |
54.2 |
1500 |
65 |
125 |
125 |
480 |
G125-40-25NY |
125 |
40 |
25 |
380 |
50 |
61 |
1500 |
65 |
125 |
125 |
495 |
G125-50-37NY |
125 |
50 |
37 |
380 |
50 |
89 |
1500 |
70 |
125 |
125 |
580 |
GG140-24-18.5NY |
140 |
24 |
18.5 |
380 |
50 |
46.2 |
1500 |
65 |
125 |
125 |
470 |
G140-30-18.5NY |
140 |
30 |
18.5 |
380 |
50 |
46.2 |
1500 |
65 |
125 |
125 |
450 |
Installation Instructions
1. Before installation, check if the fasteners of the unit are loose and if there are any foreign objects blocking the flow inside the pump body to prevent damage to the impeller and pump body during pump operation.
2During installation, the weight of the pipeline should not be added to the water pump, and there should be separate supporting bodies to prevent pump deformation from affecting operational performance and service life.
3In order to prevent impurities from entering the pump and blocking the flow channel, a filter with a cross-sectional area 3-4 times larger than the suction pipe should be installed in front of the pump inlet.
4When a pump is used to transport hot water liquids, in order to prevent the pump from being subjected to thermal deformation of the pipeline, the pump may not be fixed with foot bolts. When the pipeline system expands and contracts due to heat, the pump and pipeline can move simultaneously.
5For the convenience of maintenance and safety of use, a regulating valve should be installed on the inlet and outlet pipelines of the pump, and a pressure gauge should be installed near the inlet and outlet of the pump to ensure normal operation and service life of the pump within the rated range.
Fault causes and troubleshooting methods
Fault phenomenon |
Possible causes |
exclusion method |
1. The water pump is not producing water |
1. The import and export valves are not open, and the inlet and outlet pipelines are blocked. The impeller flow channel is also blocked. 2. The motor is running in the wrong direction and has a slow speed due to phase loss. 3. The suction pipe is leaking air. 4. There is air inside the pump chamber. 5. Insufficient imported water supply. 6. Excessive pipeline resistance and improper pump selection. |
1. Check and remove blockages 2. Adjust the motor direction and tighten the motor wiring 3. Tighten all sealing surfaces and eliminate air 4. Open the exhaust valve on the top of the motor and exhaust all the air. 5. Shutdown inspection and adjustment. 6. Reduce pipeline bends and reselect pumps. |
2. Insufficient water pump flow |
1. First, check according to the above reasons. 2. Partial blockage of pipeline and pump impeller, deposition of scale, and insufficient valve opening 3. The voltage is too low and the speed is too low. 4. The impeller mouth ring is worn and there is excessive leakage. |
1. First, exclude according to the above 2. Remove the obstruction and readjust the valve opening. 3. Voltage stabilization 4. Replace the impeller |
3. Excessive power |
1. Exceeding the rated flow usage. 2. The impeller or rotating components are rubbing against each other. 3. The sliding bearing is worn or broken. 4. The specific gravity of the medium is too high. |
1. Adjust the outlet valve to reduce the flow rate 2. Check, eliminate or replace components 3. Replace the sliding bearing 4. Modification |
4. Noise vibration |
1. Unstable pipeline support 2. Medium mixed with gas 3. Generating cavitation phenomenon 4. Friction between rotating parts |
1. Stable pipeline 2. Increase suction pressure and exhaust. 3、 降低真空度 4. Check, adjust or replace |
5. Motor overheating |
1. Excessive traffic and overloaded operation 2. The stator and rotor are rubbing against each other. 3. Insufficient voltage 4. Blockage of cooling system pipeline |
1. Adjust the outlet valve to reduce the flow rate 2. Check and exclude 3. Voltage stabilization 4. Clearing blockages |
Similar Product Recommend
