G055 series online acid/alkali concentration meter

NegotiableUpdate on 05/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The G055 series instrument is an upgraded version of the 2000 version. The G055 series online acid/alkali concentration meter is used for online continuous measurement and analysis of the percentage concentrations of chemical acids HCL, H2SO4, and NaOH in aqueous solutions, as well as for implementing automatic acid-base control, such as in power plants and industrial chemical processes.

Product Details

G055 series online acid/alkali concentration meterDetailed introduction:

Main functions and features

1）One form channel switching is compatible with acid and alkali concentration SJG2032 type, which can simultaneously measure and display acid concentration and alkali concentration for two channels SJG2032A2 type; 2) 4.3-inch color display screen3) Capacitive touch buttons; 4) Chinese English menu switching, software menu friendly prompt operation; 5) Recorder function and measurement data can be saved; 6) Two output currents of 4-20mA; 7) Three sets of relay contact outputs; 8）Communication interface RS485; 9) Equipped with automatic temperature compensation; 10) Selection of AC wide voltage and DC power supply for power supply; 11) Good sealing performance, multiple installation methods, etc.

G055 series online acid/alkali concentration meter

Two main technical parameters

1、 Electronic unit:

1.1Measurement range and error

Measurement content: Hydrochloric acid HCL, sulfuric acid H2SO4, sodium hydroxide NaOH

Concentration: 0.0~10% 15%, error ±0.25; Temperature: 0-80 ℃ with an error of ± 0.5 ℃.

1.2Resolution: concentration 0.00; Temperature 0.0.

1.3Protection level: IP67.

1.4Automatic temperature compensation range: 0-80 ℃.

1.5Isolation output current and load: 4-20mA (measuring main value and temperature output); Load<750 Ω.

1.6Communication interface RS485 Modbus RTU.

1.7Relay contacts: 3A 240VAC, 6A 28VDC or 120VAC (three sets).

1.8Power supply: 85-260VAC, 50-60Hz or 24VDC.

1.9Quality: Approximately 800g.

1.10External dimensions mm: 145 × 145 × 138 deep, embedded (disk mounted) installation hole size: 130 × 130 including 138 × 138.

There are multiple installation options available: this table is compatible with wall mounted or can be customized as an all-in-one cabinet machine.

1.11Working conditions: Environmental temperature: 0-45 ℃; Relative humidity: not exceeding 90%; There is no interference except for the Earth's magnetic field.

2、 Sensor electrode:

1）The SJ32P concentration electrode is made of polysulfone material, which is corrosion-resistant and has an electrode constant of K=30.0.

2）The concentration electrode can withstand a water sample pressure of 0.5MPa.

3）The installation methods of electrodes include flow type and insertion type, and special installation methods can be customized.

3、 Large range measurement and multi parameter measurement:

Refer to the website information of Kelan Company:KL2398Type online solution measuring instrument, using(non-contact)Inductive sensor measurement, measurement parameters and range: conductivity0to2000ms/cm，TDS0to500,000.0ppm, salinity0to200PPtSodium hydroxide0to18%Hydrochloric acid0to40%, sulfuric acid0to Nitric acid0to25%.