Grid cleaning machine in stock supply

Grid cleaning machine spot supply performance advantages

High degree of automation

The equipment can achieve fully automatic operation, reduce manual intervention, and lower labor intensity.

High separation efficiency

The clearance between the rake teeth chain can be adjusted according to demand (1mm-50mm), effectively intercepting debris of different particle sizes, and the separation efficiency can reach over 95%.

Strong corrosion resistance

The rake teeth and frame are made of stainless steel material, which is suitable for acidic and alkaline corrosive environments and extends the service life of the equipment.

Stable and reliable operation

Equipped with overload protection device, it automatically shuts down when the equipment is overloaded to avoid damage.

Low noise, low energy consumption

The motor power is configured according to the model (0.75kW-2.2kW), and the operating noise is below 65dB, which is energy-saving and environmentally friendly.

Strong self-cleaning ability

The rake chain uses self-cleaning motion and cleaning device during the rotation process to avoid debris adhesion and reduce the risk of blockage.

Grid cleaning machine in stock supplyPrecautions during use:

1、 If there are any abnormal situations or signals during operation, the machine should be stopped immediately and the power should be cut off for inspection and timely troubleshooting. It is not allowed to forcefully start the machine to prevent accidents from occurring.

2、 During the loading and unloading process of the mechanical grid cleaning machine, the equipment should be kept level, and attention should be paid to the damage caused by loading and unloading rigging to the equipment and protection should be provided.

3、 After the lifting is in place, pay attention to adjusting the mutual position relationship between the equipment and the foundation interface, water channel, and various foot bolts.

4、 Thoroughly lubricate the grille machine; Maintain good lubrication of transmission components. Lubricating oil and grease should be added and replaced according to regulations for various oiling components such as electric motors, reducers, and bearings. It should be noted that manual cleaning or lubrication is prohibited during the operation of the equipment, and it is forbidden to linger near the protective cover of the transmission chain.

5、 Regularly inspect the grille machine, such as the operation status of the motor, reducer, etc., and replace worn parts in a timely manner. At the same time, it is necessary to determine the maintenance cycle for major and medium repairs on time. Regularly check whether the bracket components are flexible, promptly eliminate foreign objects in the clamps, and check whether the screws of each component are loose. Share from New Green Exhibition Environmental Protection Technology.

6、 If the reducer base is removed for transportation purposes, it should be restored first, paying attention to the transmission axis of the two sprockets, and installing the chain and chain cover.