Welcome Customer !

Membership

Help

Xiamen Heisenberg Electric Co., Ltd
Custom manufacturer

Main Products:

cep-online>Products

HSBG-F8300 flowmeter • Liquid turbine flow sensor • Sanitary turbine flowmeter

NegotiableUpdate on 05/20
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

1、 Overview: The HSBG-F8300 series turbine flow sensor is based on the principle of torque balance and belongs to the speed type flow instrument. The sensor adopts a hard alloy bearing thrust structure, which has the characteristics of high accuracy, high wear resistance, sensitive response, and easy installation and maintenance. Suitable for media with viscosity less than 5 × 10-6m2/s, for liquids with viscosity greater than 5 × 10-6m2/s, the sensor should be calibrated with real liquid before use. Widely used in industries such as petrochemicals, metallurgy, water supply, papermaking, pharmaceuticals, food and beverage, refined oil, dairy products, etc. Suitable for flow measurement of liquids in closed pipelines that do not corrode stainless steel 1Cr18Ni9Ti, 2Cr13, corundum Al2O3, and hard alloys, and have no impurities such as fibers or particles. When used in conjunction with a flow integrator, it can be used for quantitative control and over limit alarm.

Product Details

IImainTECHNICAL INDEX

* Power supply: 24VDC±10%、 12VDC± 10%, battery powered Nominal diameter: 4-200mm, customizable

* Output signal: 4-20mA, pulse output, on-site display working pressure: 2.5Mpa, 6.3Mpa

* Accuracy: 1.0 level, 0.5 level, 0.2 level (sanitary type) Medium temperature: -40~120 ℃

* Measurement range: water 0.04~800 m3/H connection method: thread, flange

* Range ratio: 1:10, 1:15, 1:20 Environmental temperature: -20~55 ℃

* Material: 304 stainless steel, 316 (L) stainless steel, etc. Protection level: IP65