Welcome Customer !

Membership

Help

Xiamen Heisenberg Electric Co., Ltd
Custom manufacturer

Main Products:

cep-online>Products

HSBG-F8600 flowmeter · vortex flowmeter

NegotiableUpdate on 05/20
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

1、 Overview: The HSBG-F8600 vortex flowmeter is based on the Karman vortex principle and has no movable components; The detection sensor does not directly contact the measured medium; The output is a pulse signal proportional to the flow rate, with no zero drift and high accuracy; Wide measurement range and achievable range ratio; Less pressure loss, more energy-saving significance; Within a certain Reynolds number range, the output signal frequency is not affected by the physical properties and composition changes of the fluid, and the instrument coefficient is only related to the shape and size of the vortex generator. There is no need for compensation when measuring fluid volume flow rate, and the performance is stable, the life is long, and the reliability is high. It is the most ideal alternative product for orifice flowmeters. Suitable for measuring the mass and volume flow rates of superheated steam, saturated steam, compressed air, and general gases, water, and liquids.

Product Details

2、 Main technical indicators

*Power supply: 3.6V lithium battery, remote transmission to 24VDC load capacity: ≤ 300 Ω

*Output signal: 4-20mA, battery powered, no output medium temperature: -40~450 ℃

*Measurement range: saturated steam 5-1368kg/h nominal diameter: DN15-1500mm

*Measurement medium: liquid, gas, vapor Linearity: ≤± 1%

*Tested fluid: single-phase fluid or fluid that can be considered single-phase repeatability: ≤ 0.2%

*Accuracy: Level 0.5, Level 1.0 (2.5 for plug-in type) Material: Carbon steel or stainless steel

*Protection level: IP65 Environmental temperature: -20~85 ℃