HTB100-505 tunnel furnace supporting blower

Jiangsu Quanfeng Environmental Protection Technology Co., Ltd. is a modern enterprise engaged in the integrated production and sales of air fluid equipment and environmental protection equipment (compression, vacuum), and has registered its own trademark TWYX. Through years of development, the company has developed high-pressure blower series, transparent blower series, explosion-proof blower series, vortex air pump series, vacuum cleaner series, dust collector series, and other air fluid equipment (vacuum pump and blower). The team members adhere to the principle of keeping up with the times and constantly explore and innovate in the field of blower/vacuum dust removal. Design and develop a series of industrial vacuum cleaning equipment suitable for the industrial fieldHTB100-505 tunnel furnace supporting blowerConfiguration: Motor: Made according to European CE specifications. Standard: Directly driven by a 2-pole motor with IP55 and F-class insulation. Oil seal: Use maintenance free shaft seals to separate the motor and blower body. Shell: The blower and motor shells are cast separately, with a smooth and defect free surface. Muffler: Both the exhaust and intake pipes are equipped with mufflers to reduce noise.HTB100-505 tunnel furnace supporting blowerUsage: Printing Machinery Environment Machinery Drying Machine Combustion Machine Powder Machinery Incineration Stove Plastic Extraction Machine, Blowing Bag Machine Coating Machine Powder Particle Conveyor Thermostatic Box Fruit Making Machinery Kitchen Machinery Cooling Collector Woodworking Machinery General Air Supply Characteristics: ■ High pressure? High air volume? Low noise? Lightweight ■ Made of aluminum alloy material, significantly reducing weight and achieving the goal of lightweighting ■ The motor is designed for I.E.C. (1HP or above), with a fully enclosed external fan aluminum frame motor and a special axis design, suitable for long-term use. Special blade design, high pressure, large air volume, low noise, long service life. Characteristics of medium pressure blower: 1. The blades and covers of the through type medium pressure fan are made of ADC12 material. 2. The bearings of the through type medium pressure fan use high-speed and high-temperature resistant imported bearings, with 2800 revolutions per minute at 50Hz and 3450 revolutions per minute at 60Hz, without lubrication. 3、 The inlet and outlet of the transparent medium pressure fan are equipped with built-in noise reduction pipes to achieve low noise. 4、 Models below 1.1KW of the Toupu medium pressure fan can be used at full pressure. 5、 The pressure of the turbo type medium pressure fan is stable. 6、 Under the same power and pressure, the flow rate of the turbo type medium pressure fan is greater than that of similar products. 7、 The transparent medium pressure fan cover adopts a sheet-like heat dissipation design, which is equivalent to a motorcycle engine heat dissipation device, greatly reducing the temperature during fan operation. The transparent medium pressure fan adopts the principle of bearing front design, with two bearings placed at the front end of the fan blades and the rear end of the motor, achieving good dynamic balance configuration and facilitating heat dissipation. (The reason is that there are heat sinks at the front end of the fan blades for heat dissipation, while the bearings at the back end work under the built-in cooling fan of the fan, thus keeping the bearings working for a long time at low temperatures.) 9. The turbo type medium pressure fan adopts a special shock-absorbing foot design, which greatly reduces the vibration generated during the operation of the fan. 10、 The turbo type medium pressure fan is economical and energy-saving. At the same power, pressure, and flow rate, the current of a full wind high-pressure fan is lower than that of other similar products. Installation of through type blower: 1. The medium pressure through type blower should be installed in a solid and sturdy place on the ground, with sufficient space around for inspection, maintenance, and upkeep. 2. The foundation should be kept level under the base of the medium pressure turbine, and it is recommended to use shock-absorbing rubber or bolt casting installation at the four corners of the base to ensure smooth operation and low vibration of the medium pressure turbine. 3. The connecting pipeline between the medium pressure turbine and the system should be sealed reliably. For small vacuum pumps, metal pipelines can be used to connect the sealing gasket with oil resistant rubber. For small and medium pressure turbine fans, vacuum rubber hoses can be used for connection. The pipeline diameter should not be smaller than the suction diameter of the medium pressure turbine fan, and the pipeline should be short with few bends. (When welding pipelines, welding slag should be removed from the pipeline and it is strictly prohibited for welding slag to enter the vacuum pump chamber.) 4. In the connecting pipeline, users can install valves and vacuum gauges above the inlet of the medium pressure turbine fan to check the maximum pressure of the medium pressure turbine fan at any time. 5. Connect the power supply according to the regulations on the motor label, ground the wire, and install fuses and thermal relays of appropriate specifications. 6. When the medium pressure turbo fan is powered on for trial operation, the motor belt must be removed to confirm that the vacuum pump rotates in the specified direction before it can be put into use, and the medium pressure turbo fan can be reversed for oil injection. (Turn in the direction indicated by the protective cover) Precautions for use: * Overload phenomenon may occur when the XX medium pressure blower is fully closed (RB series). *When fully open, overload phenomenon may occur (CX, TB, HTB, CS, PF, MS series). At this time, use an ammeter to confirm the current size and adjust the buffer, usually within the fixed current range. *Repeatedly opening and closing the switch within one minute can cause the motor to overheat and should be avoided. *Variable frequency drive control - When using a variable frequency drive, the power waveform is distorted, the motor sound is loud, and the vibration is also significant. If the frequency converter is used for operation and the temperature rises or the vibration is large, please stop running. Please use it under the following conditions. *The frequency value (number of rotations) must be within the specified frequency range indicated on the label and within the fixed current range. *Minimum cycle number (number of rotations) - above 30 Hertz (Hz) and within the freezing current.

*Single phase motors cannot operate as frequency converters. Our company's quality goal is to achieve small profits, high sales volume, and mutual benefit. Our business strategy is to ensure customer satisfaction, and our quality policy is to use our products to make your machines more efficient and competitive.