Heat treatment flue gas purification equipment

Heat treatment flue gas purification equipment Heat treatment oil fume purification processor The exhaust gas is collected and enters the pre-treatment equipment. Then, the exhaust gas enters the pure high-voltage electrostatic oil fume purification equipment and the high and low voltage electrostatic oil fume purifier. After treatment, it is discharged into the chimney through a fan to achieve standard emissions. The entire system fully considers the safety performance requirements for combustion, explosion, etc. in the actual operating environment of the equipment from the aspects of materials, processes, and structural design; The purification efficiency meets the requirements of environmental emission limits.

　　Heat treatment flue gas purification equipmentEngineering:

Under the action of the fan, the heat treated oil mist exhaust gas enters the rotary separation, and the oil droplets are thrown towards the outer wall by the rotational power caused by the tangential introduction of the airflow. The diffused gas passes through a specially made mechanical oil removal and filtration module, which separates and filters larger particles of oil mist and dust, and collects them into an oil collection tank; In this way, only very small particles of oil mist dust remain in the gas containing oil mist. When these small (below 5um) oil mist dust (oil and gas, flue gas, organic matter, small oil mist droplets) pass through the high-voltage electric field formed between the cathode of the high-voltage DC power supply and the grounded anode, corona discharge occurs at the cathode, and the gas is ionized. The negatively charged gas ions move towards the anode plate under the action of the electric field force and collide with the flue gas particles during movement, causing the oil mist particles to be negatively charged. After the charged oil mist particles reach the anode, they release the electrons they carry, and the dust particles deposit on the anode plate. The purified standard gas is discharged from the fan outlet. The sentence is:.

The exhaust gas from the heat treatment oil fume purification processor is collected and enters the pre-treatment equipment. Then, the exhaust gas enters the pure high-voltage electrostatic oil fume purification equipment and the high and low voltage electrostatic oil fume purifier. After treatment, it is discharged into the chimney through a fan to achieve standard emissions. The entire system fully considers the safety performance requirements for combustion, explosion, etc. in the actual operating environment of the equipment from the aspects of materials, processes, and structural design; The purification efficiency meets the requirements of environmental emission limits.

　　Heat treatment flue gas purification equipmentWorking principle of heat treatment oil fume purifier: The equipment adopts multi-stage purification: the front end of the equipment consists of a three-stage purification system, mechanical filtration type → high-voltage electrostatic adsorption → the rear end has an oxidation bed for further oxidation and meets the emission standards. Under the action of the fan, the heat treated oil fume exhaust gas passes through a specially made oil removal and filtration module, thereby condensing the oil droplets in the flue gas; After entering the collection tank, the remaining smoke gas (small oil droplets, oil and gas, smoke, organic matter) will be ionized, decomposed, carbonized and adsorbed when passing through the no blind spot electric field. Trace amounts of exhaust gas will enter the oxidation bed for further oxidation and meet the emission standards.