High power charging gun cable bending tester IEC62196-1 testing machine

High power charging gun cable bending tester IEC62196-1

Equipment model: Sun WQ

Manufacturing unit: Shenzhen Sunshine Yueda Technology Co., Ltd

One Standard Overview:

The bending test machine for charging gun cables shall comply with the latest version of GB/T20234.1-22X standard "Connection devices for conductive charging of electric vehicles - Part 1: General requirements" regulation 7.11.4. Mechanical strength test for non detachable charging connection devices.

According to GB/T11918.1-2014 "Industrial plugs, sockets and couplers - Part 1: General requirements", Chapter 24: Mechanical strength, Chapter 24.4: Non rewirable electrical accessories shall be subjected to bending tests. Please refer to Table 16 of this standard for the force applied by heavy objects and the bending test apparatus shown in Figure 9.

IEC 62196-1:2022Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements

UL 2251-2022 STANDARD FOR SAFETY Plugs, Receptacles, and Couplers for Electric Vehiclesregulations42 Endurance with Load Test.

II Standard testing requirements:

Non detachable cable components shall be tested according to the method specified in 24.4 of GB/T 11918.1-2014. Among them, the force applied in the experiment should comply with the provisions of Table 6 (replacing Table 16 in GB/T 11918.1-2014). If the cable component has a liquid medium cooling device, the liquid medium should operate at rated pressure.

III Main technical parameters:

1. Control method: Using brandPLCController, touch screen operation;

2. Fixture:1Group;

3. Bending angle: left and right respectively180Continuous adjustable degree;

4. Bending frequency:0~99999Secondly, it can be set by oneself;

5. Weight:20NThe25NThe50NThe75NThe100NThe140N；

6.Power supply:220V,50/60Hz10A.

4 More equipment information:

Sincerely thank you for clicking on this webpage to view and learn about the IEC62196-1 AC/DC charging gun cable bending tester produced by Sunshine Yueda,High power charging gun cable bending tester IEC62196-1If you would like to learn more about IEC62196-1：2022，GB/T20234.1-202X，GB/T11918.1-2014，IEC62196-1:2022，SAE J1772,UL2251 We welcome you to call or write to us at any time to communicate with the relevant standard testing equipment.