-
E-mail
linxl@suntar.com
- Phone
-
Address
Sanda Technology Park
Product Categories
Sanda Membrane Environmental Technology Co., Ltd
High throughput ceramic microfiltration membrane
NegotiableUpdate on 03/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
High throughput ceramic microfiltration membrane is a new generation developed through further technological innovation based on the complete introduction of production processes. At present, it has been widely used in many fields such as environmental protection, food, medicine, chemical engineering, biotechnology, etc.
Product Details
Product Introduction
High throughput ceramic microfiltration membraneThe product is a new generation of high-performance products developed through further technological innovation based on the complete introduction of production processesceramic membraneAt present, the product has been widely used in many fields such as environmental protection, food, medicine, chemical engineering, biotechnology, etc.
High throughput ceramic microfiltration membranes have various significant characteristics, including strong chemical stability, high temperature adaptability, high mechanical strength, good pollution resistance, long lifespan, high filtration accuracy, strong environmental adaptability, and potential for resource recovery. These characteristics make ceramic microfiltration membranes excellent in treating various industrial wastewater, biological fermentation liquids, etc., not only improving treatment efficiency and quality, but also promoting resource recycling and environmental protection.
Firstly, ceramic microfiltration membranes have strong chemical stability, can withstand acidic and alkaline environments, and are suitable for a wide range of pH values, which makes them excellent in treating chemical and metallurgical wastewater. Secondly, the high-temperature stability of ceramic materials enables them to withstand high-temperature environments, making them suitable for high-temperature disinfection processes or treatment of high-temperature wastewater. High mechanical strength is also an important characteristic of ceramic microfiltration membranes. Compared to organic membranes, ceramic microfiltration membranes are more resistant to wear and can withstand higher pressure differentials, reducing the risk of membrane damage.
Technical Features
Prevent reunion
The application of nanoparticle dispersion technology avoids the aggregation of nanoparticles during membrane preparation, endowing membrane products with new nanoparticle characteristics and excellent membrane performance
Enhance hydrophilicity
Adding uniformly distributed superhydrophilic nanoparticles to the materialTiO2Particles have significantly increasedceramic membraneThe flux and anti pollution performance.
Through this technology, nano powder can fully play its role:
The agglomeration of nanoparticles will affect the properties of nano powders:
Nano dispersion technology endowsceramic membraneUniform filtering aperture and uniform connection strength enableceramic membraneFeaturing high-precision filtration, high pollution resistance, and high wear resistance
Nano dispersion technology enables sinteringceramic membraneSimultaneously possessing high porosity and high connection strength, thereby ensuring high membrane flux while significantly improving wear resistance and service life
Product Parameters
| suntar-ceramic membrane | |
|---|---|
| Supporting material | Al2O3 |
| Membrane material | Al2O3ZrO2TiO2 |
| Applicable pH range | 0-14 |
| burst pressure | 25mm membrane tube ≥ 4Mpa 30mm membrane tube ≥ 6Mpa 40mm membrane tube ≥ 8Mpa |
| organic solvent | insensitive |
| Operating temperature | ＜350℃ |
| Operating pressure | ≤1Mpa |
| membrane shell | ||
|---|---|---|
| Loading quantity | 1. 3, 7, 19, 37, 61, 91, 99, 138 | |
| fill area | ~63.47㎡ | |
| length | 250-1200㎜ | |
| material | foreign exchange control | SS304、SS316L、FRPP、 Dual phase steel, titanium material |
| seal | EPDM rubber, fluororubber, silicone rubber | |
| operating conditions | temperature | ＜100℃ |
| pressure rating | 0-4.0Mpa | |
Tailored to meet special design requirements
Product Specifications
| Product Specifications | Sectional geometry diagram | Number of pores | Hole diameter (mm) | Product length (mm) | Membrane area (㎡) |
|---|---|---|---|---|---|
| T7/60/250 |  |
7 | 6.0 | 1178 | 0.155 |
| T19/35/250 |  |
19 | 3.5 | 1178 | 0.246 |
| T9/55/250 |
 |
9 | 5.5 | 1178 | 0.178 |
| T23/36/250 |  |
23 | 3.6 | 1178 | 0.300 |
| T19/40/300 |  |
19 | 4.0 | 1200 | 0.287 |
| T37/30/300 |  |
37 | 3.0 | 1200 | 0.418 |
| T61/20/300 |  |
61 | 2.0 | 1200 | 0.460 |
| T19/60/400 |  |
19 | 6.0 | 1200 | 0.430 |
| T37/38/400 |  |
37 | 3.8 | 1200 | 0.530 |
The product lengths in the table are standard sizes. If there are other requirements, sizes smaller than 1200mm can be customized.
product equipment
ceramic membraneequipment
ceramic membraneequipment
