Household automatic booster pump

　　Household automatic booster pumpIt opens based on changes in pressure inside the pipeline, and works by the magnitude of the pressure. When the water pressure is below a certain value, the sensor sends a command to the relay, and the water pump starts working. When the water pressure reaches a high value, it stops working.

For example, setting the pipeline pressure to 0.1MP

The booster pump will automatically stop after boosting the pressure inside the pipeline to 0.1MP

When using water, the pipeline will release pressure, and when the pressure drops below a set value, the booster pump will open again.

The water pressure at home is low, so a booster pump is installed. Without using water, the booster pump automatically works for one second every about ten minutes. There may be several reasons for this situation, including:

1、 Pressure issue, one of the faucets is leaking and the water pressure is releasing quickly, so the booster pump should be turned on in a timely manner.

2、 Some booster pumps are controlled based on water flow, automatically boosting as soon as the water flows. If the sensitivity of the water pump is not enough and the water flow is large, it will also automatically start boosting.