IS Clear Water Series Centrifugal Pump

IS centrifugal pump is a new type of single-stage single suction horizontal clear water centrifugal pump designed according to the performance and size specified in the international standard ISO2858. Its technical standards are close to international standards, and it has wide universality. There are a total of 140 specifications in the entire series, but only four shafts are used; Shafts, bearings, shaft seals, impeller fasteners, etc. of the same specification can be interchanged; There are only four types of suspension for the entire series of pumps. Reaching the international advanced level. It is one of the energy-saving pump products promoted in China. The pump is rear opening, so there is no need to disassemble the suction and discharge pipelines when removing the pump cover and impeller. The suspension is equipped with two ball bearings, which are lubricated with machine oil or grease. The pump is directly driven by an electric motor through an elastic coupling. The snail chamber, feet, inlet flange, and outlet flange are cast as a whole. Provide suction and delivery of clean water and liquids with physical and chemical properties similar to water without solid particles. It is widely applicable in industry, agriculture, urban areas, drainage, fire water supply, etc.

IR type hot water pump is used to transport hot water below 200 ℃ and corrosive, viscous liquids similar to water. It is mainly used for hot and cold water flushing in the production process of color cathode ray tube glass shells, as well as in metallurgy, chemical industry, printing and dyeing, weaving, chemical industry, printing and dyeing, ceramics, heating, air conditioning, and corrosion heat utilization.

　　Main purposes:

Mainly used in metallurgy, chemical industry, power plants, heating, textile, waste heat utilization, heat exchange devices, etc.