Immersion multi-stage centrifugal pump

NegotiableUpdate on 03/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Brief description: CDLK/CDLKF immersion multi-stage centrifugal pump - specifically used for electric discharge, lathes, grinders, machining centers, cooling devices, industrial cleaning equipment, filtration systems, etc.

Product Details

CDLK/CDLKF immersion multi-stage centrifugal pump-Introduction
CDLK/CDLKF is a self-priming vertical multi-stage centrifugal pump with a standard motor installed. The motor shaft is directly connected to the pump shaft through a coupling of the pump head. The pump can be equipped with an intelligent protector as needed to effectively protect against dry running, phase loss, overload, etc. To meet the installation depth of the sink or container, a cavity can be installed to change the length of the pump itself. The length of different stages can be found in the size and weight table and the available product range table.
CDLK/CDLKF immersion multi-stage centrifugal pump-Application scope
CDLK/CDLKF is used for conveying machine tool coolant, lubricants, condensate water, industrial cleaning equipment, and other applications suitable for immersion pumps. It is suitable for different temperature, flow rate, and pressure ranges. CDLK is suitable for non corrosive liquids, while CDLKF is suitable for mildly corrosive liquids. Specifically used for electric discharge, lathes, grinders, machining centers, cooling devices, industrial cleaning equipment, filtration systems, etc.
CDLK/CDLKF immersion multi-stage centrifugal pump-Motor
The motor is a fully enclosed, air-cooled standard motor with two poles.
Protection level: IP55
Insulation level: F
Standard voltage: 50HZ: 1 * 220-230/240V
3*200/346V
3*220-240/380-415V
3*220-225/380-440V
Other voltage motors are available as required.
Single phase voltage can be supplied from 0.37-2.2kw.

CDLK/CDLKF immersion multi-stage centrifugal pump-condition
Thin, clean, non explosive liquid free of solid particles and fibers, capable of transporting water, cooling water solutions, and cutting lubricants.
Liquid temperature: Room temperature type -15 ℃~+70 ℃
Hot water type+70 ℃~+120 ℃
CDLK/CDLKF immersion multi-stage centrifugal pump-Model Meaning

CDLK/CDLKF immersion multi-stage centrifugal pump-Performance Curve

All curves are based on the measured values of the motor at a constant speed of 2900r/min.

2. The curve tolerance complies with ISO9906, as shown in the performance curve graph.

3. The test is conducted at 20 ℃ without air or water, with a kinematic viscosity of 1mm2/s.

4. The use of the pump should refer to the performance range indicated by the bold line to prevent excessive water flow, overheating, and motor overload.

CDLK/CDLKF immersion multi-stage centrifugal pump-pump installation

CDLK/CDLKF performance parameters

Caliber (import/export):32-80mm
Traffic:0.4-55（m3/h）
Lift:10-320m