Imported high-pressure steam jet liquefier heated liquefier

Importhigh pressureSteam jet liquefier Heating liquefactioninjectorDuring the liquefaction process, high-intensity micro turbulence can be formed, with good starch dispersion effect, zero hour saccharification, no insoluble starch particles, good protein coagulation effect, and good separation effect between starch and protein. Through jet liquefaction, proteins clearly gather together and float on the liquid surface, greatly accelerating the filtration speed of sugar solution. Eliminating interstitial liquefaction caused by material The lack of dextrin at the end of saccharification caused by uneven heating of the liquid has changed the difficulty of protein coagulation and sugar filtration, and proteins and dextrins are mixed in the sugar liquid, resulting in increased foam during fermentation and serious liquid escape, affecting the extraction rate of the following process and the production situation of poor quality of refined liquid.

featurefeature

1.Suitable for low-pressure and superheated steam jet liquefaction

Adopting the method of using material with steam, the driving force is the material liquid, which is not only suitable for low-pressure steam, but also for superheated steam jet liquefaction105℃When spraying liquefaction, the steam pressure only needs to be0.1MpaIt can meet the liquefaction needs and achieve steam balance, even mixing of gas and liquid. Compared with traditional liquefaction methods, it can save steam15%The above.

Specifications(Hourly processing capacity)Dry matter meter:0.2～100T/hLiquid meter:0.5～300T/h

2.Suitable for high-pressure steam jet liquefaction

Adopting the method of using steam to carry materials, the driving force is high-pressure steam, which carries animal materials to liquefy more evenly and fully. At the same time, due to the low head requirement of the feed pump, energy consumption can be further saved, resulting in a further reduction in production costs

Specifications(Hourly processing capacity)Dry matter meter:0.2～100T/hLiquid meter:0.5～300T/h

3.Intelligent steam jet liquefier

a.Accurately controlling the temperature of jet cooking, the intelligent jet liquefier adoptsVADStructural design, in conjunction with the control system, accurately controls the high-speed steam flow rate and forms high-intensity shear turbulence between the high-speed steam and the liquid material, ensuring thorough and uniform mixing and heating of the steam and liquid. Accurately controls the temperature of the effluent mash to ensure that the powdered milk slurry is thoroughly cooked and steamedC.

b.Energy saving and effective: This type of jet liquefier operates at steam pressure≥0.5MpaAnd not lower than0.5MpaUnder the condition of steam supply pressure, the jet liquefaction system is used to treat starch milk slurry1.8—2.0mmLarge grain corn flour, dried potato and cassava mash have good liquefying and boiling effect, and at the same time, it requires low head of feed pump and consumes less energy.

4.Laboratory specific

Laboratory specificThe characteristics of the liquefaction injector are specially designed to provide testing for large-scale production, which can help users obtain complete technical solutions close to industrial level. At the same time, it can also be used as a small-scale production equipment for small-scale production.

Used in industries such as glucose syrup, maltose syrup, high maltose syrup, isomaltooligosaccharides, maltodextrin, caramel coloring, fruit glucose syrup, crystalline glucose starch sugar, monosodium glutamate, lysine, alcohol, beer, glycerol, citric acid, lactic acid, xanthan gum, itaconic acid, yeast, etc

Specifications(Hourly processing capacity)Dry matter meter:0.2～100T/hLiquid meter:0.5～300T/h

Importhigh pressureSteam jet liquefier Heating liquefactioninjectorTechnical Specifications

SpecificationsSpecification:1/2～8'

Applicable TemperatureTemperature：≤300℃

pressure rangePressure Range：16-64 bar

connection methodConnection method: Flange connectionflange connection

Please note when using:

1The steam and feed liquid of the spray liquid need to be vertically installed with check valves.

2The steam chamber and liquid chamber of the injector need to be installed0—1MpaPressure gauge. Install on thermometer interface0—150℃Electronic thermometer.

3To prevent the nozzle of the sprayer from being blocked by ropes, debris, etc., a slag removal basket (screen mesh) should be installed when entering the mixing tank14—16eye/Inches).

4The starch milk feed pump adopts a working pressure greater than0.3MpaThe high-temperature slurry pump.

5This device is suitable for30—40℃Concentrated starch emulsion. Adjust according to the process requirementsPHValue, add the required enzyme preparation.

6Adjust the steam valve and feed valve to ensure that the liquefaction outlet temperature meets the process requirements.

7After liquefaction, rinse the sprayer with clean water to keep it clean.