Imported oil solenoid valve

Product Name:	Imported oil solenoid valve	Product Model:	Buhrer
Driving mode:	electromagnetic	Connection form:	Flange, thread
Structural form:	Piston type, pilot type, direct acting type	Sealing structure:	piston-type
Pressure range:	1.6-100MPa	Nominal diameter:	DN1-500
Common materials:	WCB, 304, 316, etc	Technical Consultation:

Product Introduction The imported oil solenoid valve produced by Breyer can be driven by electromagnetic and connected by flange or thread. The structural form can be piston type, pilot type, direct acting, and the sealing structure can be piston type. The pressure range is PN1.6-100MPa, the nominal diameter is DN1-500mm, and the material can be WCB, 304, 316, etc. Due to the wide range of valve applications, the same type of valve can have different combinations in different situations and working conditions. If you are a non professional, please feel free to call our company for consultation. Our company has professional technical personnel to serve you! Technical Department Phone: Product Details

Imported oil solenoid valveBuhrerBrand aerospace, shipbuilding heavy industry, petrochemicals, industrial furnaces, boilers, water supply and drainage, heating and air conditioning, fire-fighting equipment, drying equipment, food equipment, cleaning equipment, landscape sprinkler irrigation, water plants and other pipeline products in various fields. This product has a pilot operated structure, with stainless steel pistons for the valve cores. The piston rings will not be stuck by impurities in the medium, and the dynamic sealing performance is high,Long lifespan; There is no direct friction between the piston and the metal valve chamber, and there is no restriction on the installation direction of the valve body; Autocratic coil, not easy to burn out; Long term stop action restarts, with equally sensitive action; Zero leakage; Long service life100Over ten thousand times.

the United StatesBuhrerBrand series of imported solenoid valves: imported petroleum solenoid valves, direct acting solenoid valves, step-by-step direct acting solenoid valves, medium and low pressure solenoid valves, high pressure solenoid valves, ultra-high pressure solenoid valves, ultra-high temperature solenoid valves, steam solenoid valves, low-temperature solenoid valves, anti-corrosion solenoid valves, submersible solenoid valves, gas solenoid valves, gas quick cut-off solenoid valves, gas safety solenoid valves, vacuum solenoid valves, pulse type solenoid valves, self-protection solenoid valves, two position three-way solenoid valves, solenoid valves with manual function, solenoid valves with signal function, etc.

Imported oil solenoid valveMain technical parameters:

Product Specifications	DN1～DN500
Valve body material:	Cast steel, stainless steel, etc
Applicable media:	Petroleum, gas, oilgasGas, corrosive fluids, etc
Temperature range:	-100～+550℃
Medium viscosity:	Less than 50C St (customized if greater than)
Protective performance:	Waterproof, explosion-proof (Exd IICT5), anti-corrosion
Wiring method:	Wire socket type; Lead type; Plug in type
Control method:	Normally open, normally closed
Power supply voltage:	DC24V; AC36～380V：DC6V—DC220V
Connection method:	Internal thread, flange, external thread
Leakage rate:	zero

Imported oil solenoid valveWorking principle: Normally closed: When the coil is energized, the pilot valve core is attracted, the pilot hole is opened, the upper chamber of the valve is depressurized, the piston is pushed by the pressure of the lower chamber medium, and the solenoid valve is opened; When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is closed, the valve chamber is pressurized by the piston throttle hole and the thrust of the reset spring, and the solenoid valve is closed. Normally open: When the coil is energized, the pilot hole closes, and the upper chamber of the valve is pressurized by the piston orifice and the thrust of the reset spring, causing the solenoid valve to close. When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole opens, the upper chamber of the valve is depressurized, the piston is pushed by the pressure of the lower chamber medium, and the solenoid valve opens.

The installation direction of the solenoid valve is unlimited. (S-horizontal installation, C-vertical installation)