Input 180-425V half brick 1000W, national production output 28V

NegotiableUpdate on 02/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

UHC1000W series $r $n features $r $n ◆ high efficiency 95% $r $n ◆ maximum output power up to 1000W $r $n ◆ input/output isolation 2250VDC $r $n ◆ ultra small volume: 63& #215; 60.6& #215; 13mm $r $n ◆ High reliability: No built-in aluminum and tantalum electrolytic capacitors $r $n ◆ Overcurrent, overvoltage, and short-circuit protection circuits $r $n ◆ Application scope: Industrial control, rail transit, missile borne, communication and other electronic equipment

Product Details

UHC1000W series

feature

◆ High efficiency of 95%

The maximum output power can reach 1000W

◆ Input/output isolation 2250VDC

◆ Ultra small volume: 63 × 60.6 × 13mm

◆ High reliability: No built-in aluminum and tantalum electrolytic capacitors

Overcurrent, overvoltage, and short-circuit protection circuits

Application scope: Industrial control, rail transit, missile borne, communication and other electronic equipment

model	Input（VDC）	Output（VDC）	output current	rippleVp-p	efficiency	Overall dimensions
UHC1000-270S28N	180～425V	28V	35.7A	200mV	95％	63×60.6×13mm

Note:1Unless otherwise specified, all parameters are at ambient temperature+25℃, measured under rated input/output and full load pure resistive load.

2If you need special voltage output, please call our company.

3, suffix“P”The model comes withpositivelogic，suffix“C”It is a threaded hole installationM2.5， Default is through-hole.

4. Add - M (-55 degrees start) to the suffix, and the rule is P-C-M.

output parameters	remark	minimum	typical	maximum	unit
special sex	article document (Unless otherwise specified) -55℃≤TC ≤100℃ , VI=270V±2V， Enable the foot to be connected to the input ground, Connect the positive sensing terminal to the output positive terminal, Connect the negative induction terminal to the output negative terminal, CIN=22 μF，COUT=1000 μF，CLa=10 μF+1 μF
output voltage	VI=180～425V，	27.44	28.00	28.56	VDC
output current	VI=180～425V			37.5	A
Output voltage regulation range	IO ≤ 35.7A, PO ≤ 1000W, TA=25 ℃, ensure that the power does not exceed 1000W when the voltage is raised, and ensure that the output current does not exceed 35.7A when the voltage is lowered	25.2		30.8	V
output ripple voltage (Peak to Peak)	Full load, bandwidthBW ≤20MHz		140	280	mV
Output during load transient Voltage variation (peak value)	IO=50% load → 75% load → 50% load, 0.1A/μ s, output with 2200 μ F capacitive load test, TA=25 ℃			1400	mV
Output during load transient Voltage recovery time				800	US
Current uniformity accuracy bf	IO=50% load~100% load, TA=25 ℃			5	％
Voltage regulation rate	VI=180V～425V， fully loaded			1	％
Load Regulation	IO=3.57A →35.7A			1	％
short circuit protection	Long term, self-healing
Overvoltage protection		33.6		39.2	VDC
overcurrent protection		37.5		53.5	A