Iron hydroxide drinking water arsenic removal filter SY02-P

Iron hydroxide drinking water arsenic removal filter SY02-Padvantage：

High adsorption capacity:SY02-P for arsenic (As) in water³⁺/As⁵⁺）The adsorption capacity can reach4-14 g/kg， The adsorption capacity is more than 5 times that of common adsorbents.

Adapt to high flow rates:Its extremely large specific surface area ensures sufficient contact with arsenic, thereby achieving efficient adsorption effect,SY02-P can adapt to operating flow rates of 10-20m/h and can quicklywellAdsorb and remove arsenic from water.

Stability performance:Translate into EnglishSY02-P is used as a groundwater arsenic removal filter, and the arsenic penetration concentration is set to ≥ 0.01ppm. Its adsorption saturation period is generally 2-5 years - within this time range, SY02-P can maintain efficient and stable adsorption capacity.

Wide applicability:inThe performance is stable within the range of pH 5-9 and water temperature 5-40 ℃. Capable of adapting to various water quality conditions and maintaining high adsorption capacity even under high salinity.

No need for regeneration:Applied in the field of arsenic removal from drinking water, it can achieve one-time adsorption saturation without regeneration（Replace the filter material directly within 2-5 years. This eliminates the generation of wastewater and waste residue when using SY02-P filter material, reducing equipment and operation costs.

Not changing water quality:Unlike the physical separation of reverse osmosis membranes and the extensive adsorption of ion exchange resins.The mechanism of action of SY02-P adsorbent is physical (electrical)+chemical (reactive) adsorption, with strong selectivity for arsenic. It does not adsorb common ions in water and generally does not change the composition of ions in water.

Easy to use:Just need to deliver a certain amount as requiredFill SY02-P into the filter tank, then backwash and clean the filter material at a certain flow rate to start normal operation. It should be noted that when the pressure difference before and after the arsenic removal filtration system is ≥ 0.05Mpa, a backwash is required to loosen the filter bed. We will quantify the operational process and provide clear indicators, making it easy for even non professionals to operate.

Technical SupportWe can evaluate the project situation and develop relevant design and operational guidance for the client, providing both product and technical supportcomprehensiveThe help.

High cost-effectiveness:Compared to similar adsorbents,The price of SY02-P is relatively low, and under normal circumstances, the cost per ton of water is about 0.1-0.2 yuan.

Iron hydroxide drinking water arsenic removal filter SY02-PApplication Scenario:

Centralized purification of drinking water in water plants

Groundwater treatment in villages and towns

Process water for arsenic removal

Upgrading and renovating rural drinking water standards

Mine water treatment

Removing arsenic from beverage water and mineral water

Deep adsorption discharge of sewage at the end meets the standard