JC-801A piston type cylindrical mud collector

1、 Product Introduction

Collecting rivers, lakes, and pondsUnderwaterDifferent types ofSediments (bottom sediment, sediment, sludge)Swamp soil, mud carbon soil.

2、 Product parameters

1、Suitable for water depth:5m

2Sampling tube: long100cm, diameter 4cm

3. Stainless steel cutting head (conventional analysis sampling)

4. Engineering plastic cutting head (heavy metal analysis sampling)

3、 Product Features

1. Thread the piston rod through the fixture, then install the piston onto the piston rod, and insert the piston and piston rod into the sampling tube.
2. Put on the cutting head, and then fix the cutting head, sampling tube, and fixture together with a steel strip.
3. Connect the extension rope to the top of the piston rod.
4. Connect the extension rod and T-shaped handle according to the actual situation, and push the piston to the bottom of the sampling tube before sampling.
5. After determining the sampling location, insert the sampling tube vertically into the water and feel that the sampler is not sinking (the cutting head has already entered the mud),Lift the sampler upAbout 10-20 centimeters, and then 10-20 centimeters in front, back, left, and right to determine the new sampling point.

6. Tighten the extension rope and secure it so that the piston position is relatively fixed, then push down the T-shaped handle with force to allow the sampling tube to enter the sinkAfter reaching the predetermined sampling depth in the sediment, fix the extension rope on the extension rod or handle and remove the sampler to complete one samplingSampling.

Juchuang Environmental Protection provides you with comprehensive technical support and perfect after-sales service! Details consultation:

1. Thread the piston rod through the fixture, then install the piston onto the piston rod, and insert the piston and piston rod into the sampling tube.
2. Put on the cutting head, and then fix the cutting head, sampling tube, and fixture together with a steel strip.
3. Connect the extension rope to the top of the piston rod.
4. Connect the extension rod and T-shaped handle according to the actual situation, and push the piston to the bottom of the sampling tube before sampling.
5. After determining the sampling location, insert the sampling tube vertically into the water and feel that the sampler is not sinking (the cutting head has already entered the mud),Lift the sampler upAbout 10-20 centimeters, and then 10-20 centimeters in front, back, left, and right to determine the new sampling point.

6. Tighten the extension rope and secure it so that the piston position is relatively fixed, then push down the T-shaped handle with force to allow the sampling tube to enter the sinkAfter reaching the predetermined sampling depth in the sediment, fix the extension rope on the extension rod or handle and remove the sampler to complete one samplingSampling.

1、Suitable for water depth:5m

2Sampling tube: long100cm, diameter 4cm
3. Stainless steel cutting head (conventional analysis sampling)

4. Engineering plastic cutting head (heavy metal analysis sampling)